2005-2009 Subaru Outback 2.5L H4 | 4 PC Ignition Coil | OE#22433AA460/UF508 - PHILTOP

2005-2009 Subaru Outback 2.5L H4 | 4 PC Ignition Coil | OE#22433AA460/UF508 - PHILTOP

Quick Ignition Response

High-Grade Insulation

Built to Last

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7589IGC3778US

Specifications

Brand
PHILTOP
Items Included
4x Ignition Coil - UF508
Type
Pen-Type
Quantity
4
Color
Black
Pin Count
3
Warranty Period
2-Year
OE Number
22433AA460,22433AA541,22433AA540,22433AA480,22433AA542,22433AA640,22433AA418,22443AA540,32009782,32011222,32010633
Part Number
UF508,E1008,C760,GN10484,48706,UF508T,6730201,U5141,C1479,5C1478,521799,E1067,IC588SB,CLS1200,5072,CUF2168,IC647,E1008P,1788450,CJ02,MPSMF508,175807,C14794,1415164,1415163D,1415163

Highlights

  • [Compatible Vehicle] The ignition coil pack is compatible with 2004-2010 Impreza 2.5L GT/WRX/WRX Limited/WRX Premium/WRX STI/WRX STI Limited/WRX STI Special Edition/WRX TR Forester 2.5L XT/Sports 2.5L XT/XT/XT Limited/XT Premium, 2005-2009 Legacy GT/GT Limited/GT spec.B Outback 2.5L XT/XT/XT Limited, 2004-2006 Baja Turbo, 2006 9-2X Aero
  • [Easy Installation] OE Interchange Number: UF508, 22433AA418, 22433AA480, 22433AA540, 22433AA541, 22433AA542, 22433AA640, 22443AA540, 32009782, 32010633, 32011222, UF567. OE Standards ensure fast and easy installation. Please check the compatibility at the top of the page to confirm match your vehicle
  • [Security] PHILTOP coil packs undergone strict quality control testing, providing excellent performance and reliability, and no worry for misfire
  • [Long Life] The coils with premium quality provide high corrosion and temperature resistance, for high energy output and fast ignition, extend the service life
  • [What You Get] Automotive replacement ignition coil | Fast ignition within 0.1-0.2 seconds | 140°C high temperature and corrosion resistance | RF Interference Protection | 6500Mi Longer lifespan | High voltage output | Smoothly Engine runs | After Sales Service

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20062004 - 200620082004 - 200520092006 - 2010200520102009 - 20102006 - 20102006 - 200720102009 - 20102004 - 2010200720102006 - 20072005 - 200620052007 - 20092006 - 20092005 - 20062005 - 2009
MakeSaabSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaru
Model9-2XBajaForesterForesterForesterForesterForesterForesterImprezaImprezaImprezaImprezaImprezaImprezaImprezaImprezaImprezaLegacyLegacyLegacyLegacyOutbackOutback
TrimAeroTurboSports 2.5 XTXTXTXT LimitedXT PremiumXT Premium2.5 GTWRXWRX LimitedWRX LimitedWRX PremiumWRX STIWRX STI LimitedWRX STI Special EditionWRX TRGTGT LimitedGT LimitedGT spec.BXTXT Limited
Engine2.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H4
Note
Alternate Number
----------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Related Diagnostic Codes

  • P0300-Random/multiple-cylinder misfire — inspect the spark plugs, ignition coils, wiring and fuel system.
  • P0301–P0306-Specific-cylinder misfire — inspect the plug, coil and wiring for the indicated cylinder.
  • P0350-Ignition-coil primary/secondary circuit fault — check coil resistance, connectors and wiring.
  • P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.

Checks Before Installation

  • Confirm the ignition coils and spark plugs match the vehicle and original parts.
  • Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
  • Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
  • Check the spark-plug wells for oil, carbon deposits or debris.
  • Allow the engine to cool completely before removing the spark plugs.
  • Confirm the specified spark-plug gap and installation torque in the vehicle service manual.

Installation Steps

  • Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
  • Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
  • Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
  • Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
    Gasket seat and tapered seat spark plugs compared

    Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.

    Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.

  • Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.

Spark Plug Torque Reference

Spark Plug ThreadRecommended Torque
18 mm (M18)35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket10–20 N·m (7.4–14.8 lb-ft)

Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.

After Installation

  • Clear historical fault codes with an OBD-II scanner.
  • Start the engine and let it idle for several minutes.
  • Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
  • Check that the malfunction indicator light remains off.
  • Perform a short road test, then rescan for returned fault codes.

Product Video

Product Description

ignition coilIgnition Coils

Reviews

4.6/5

Based on 9 reviews

567%
422%
311%
20%
10%

Mike from Texas_260

05/23/2025

The craftsmanship on these is excellent, and they're priced really well. My car feels significantly better. Definitely a good investment.

Kelly_SUV_Life_307

09/18/2025

Easy to get these installed, and the shipping was super quick. Got them here in no time. Very pleased with the whole process.

FAQS

Fitment depends on your engine size and year. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind the quality of our ignition systems with a 3-Year Limited Warranty. Scroll to the "Warranty & Support" section at the bottom of the page for full details on our 3-year reliability guarantee.

Yes, these are common symptoms of a failing coil (Code P0300-P0308). Review the "Product Highlights" section to see how our high-voltage output restores smooth engine performance.