2003-2009 BMW X5 3.0L L6 | 6 PC Ignition Coil | UF522 - PHILTOP

2003-2009 BMW X5 3.0L L6 | 6 PC Ignition Coil | UF522 - PHILTOP

Quick Ignition Response

High-Grade Insulation

Built to Last

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7619IGC592JUS

Specifications

Brand
PHILTOP
Items Included
6x Ignition Coil - UF522
Type
Pen-Type
Quantity
6
Color
Black
Pin Count
3
Warranty Period
2-Year
Part Number
UF522

Highlights

  • [Vehicle Fitment]: Compatible with [BMW] 2004-2007 X5 4.4/4.8L, 2004, 2005 X5 3.0L, 2003, 2005 Z4 2.5L, 2006-2006 Z4 3.0/3.2L, 2008-2008 Z4 3.2L, 2005-2006 X3, 2003-2004 530i, 2003-2005 325xi, 330xi, 2005-2005 325i, 325Ci, 525i, 2002-2005 745Li, 2006-2006 750Li, M3, 760i, 2002-2002 M3, Z3 3.2L, 2003-2003 330i, 330Ci, 2002-2003 745i, 2004-2004 545i, 645Ci, 2007-2007 550i, 750i, 2010-2010 650i, 2007-2008 Alpina B7, 2004-2006 760Li, 2008-2008 760Li, [Rolls-Royce] 2004-2010 Phantom
  • [OEM Design]: Meets strict OE specifications for precise fit and performance, matching or exceeding the original factory part. Reference Number: UF522
  • [High-Quality Ignition Coils]: OEM replacement ignition coil | Ignites within 0.1–0.2 seconds | Resists corrosion at up to 140 °C | Provides RF interference protection | Offers a lifespan of 6500+ miles | Delivers high voltage output | Ensures smooth engine operation.
  • [High-Quality Spark Plugs]: Equipped with a premium iridium center electrode for exceptional durability (up to 3× longer life), stable engine idle, enhanced performance, improved fuel efficiency, and faster starts.
  • [Easy Installation]: PHILTOP Ignition Coil Packs and Spark Plugs Rigorous testing ensures maximum durability. Backed by 166+ years of expertise for simple, safe installation and reliable performance.
  • [Warm Tips]: Please enter your vehicle’s year, make, and model to verify fitment before purchasing.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2003 - 20052003 - 20052003 - 20052003 - 20062003 - 20052003 - 20052003 - 20052003 - 20042004 - 20052006 - 20092004 - 20052006 - 20102002 - 20052002 - 20052006 - 20082006 - 20082003 - 20082004 - 20062007 - 20082002 - 20062004 - 20052004 - 20062004 - 20062004 - 200620032007 - 20082004 - 200620092001 - 20022001 - 20022003 - 20052003 - 2005200620062007 - 200820062007 - 2008200620062004 - 20102009 - 20102008 - 20102006 - 2010
MakeBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWRolls-RoyceRolls-RoyceRolls-RoyceRolls-Royce
Model325Ci325i325xi330Ci330i330xi525i530i545i550i645Ci650i745Li745i750Li750i760Li760iAlpina B7M3X3X3X5X5X5X5X5X5Z3Z3Z4Z4Z4Z4Z4Z4Z4Z4Z4PhantomPhantomPhantomPhantom
TrimBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBase2.5i3.0i3.0i4.4i4.6is4.8i4.8isxDrive48iM CoupeM Roadster2.5i3.0iCoupe 3.0siM CoupeM CoupeM RoadsterM RoadsterRoadster 3.0iRoadster 3.0siBaseCoupeDrophead CoupeEWB
Engine2.5L L62.5L L62.5L L63.0L L63.0L L63.0L L62.5L L63.0L L64.4L V84.8L V84.4L V84.8L V84.4L V84.4L V84.8L V84.8L V86.0L V126.0L V124.4L V83.2L L62.5L L63.0L L63.0L L64.4L V84.6L V84.8L V84.8L V84.8L V83.2L L63.2L L62.5L L63.0L L63.0L L63.2L L63.2L L63.2L L63.2L L63.0L L63.0L L66.7L V126.7L V126.7L V126.7L V12
Note----------------------------------
To 06/2009
-
To 06/2009
------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Related Diagnostic Codes

  • P0300-Random/multiple-cylinder misfire — inspect the spark plugs, ignition coils, wiring and fuel system.
  • P0301–P0306-Specific-cylinder misfire — inspect the plug, coil and wiring for the indicated cylinder.
  • P0350-Ignition-coil primary/secondary circuit fault — check coil resistance, connectors and wiring.
  • P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.

Checks Before Installation

  • Confirm the ignition coils and spark plugs match the vehicle and original parts.
  • Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
  • Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
  • Check the spark-plug wells for oil, carbon deposits or debris.
  • Allow the engine to cool completely before removing the spark plugs.
  • Confirm the specified spark-plug gap and installation torque in the vehicle service manual.

Installation Steps

  • Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
  • Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
  • Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
  • Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
    Gasket seat and tapered seat spark plugs compared

    Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.

    Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.

  • Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.

Spark Plug Torque Reference

Spark Plug ThreadRecommended Torque
18 mm (M18)35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket10–20 N·m (7.4–14.8 lb-ft)

Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.

After Installation

  • Clear historical fault codes with an OBD-II scanner.
  • Start the engine and let it idle for several minutes.
  • Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
  • Check that the malfunction indicator light remains off.
  • Perform a short road test, then rescan for returned fault codes.

Product Video

Product Description

11

Reviews

4.5/5

Based on 6 reviews

567%
417%
317%
20%
10%

Chris_GearHead_167

03/10/2026

These feel really well-built and the price is fantastic compared to the dealer. My BMW is running great, and I saved a good amount of money. Happy with the quality and value.

DaveTheMechanic_453

09/06/2025

Super easy to swap these out, and they arrived very quickly. My X3 is running smooth as butter now. Couldn't ask for a better experience with the installation and delivery.

FAQS

Fitment depends on your engine size and year. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind the quality of our ignition systems with a 3-Year Limited Warranty. Scroll to the "Warranty & Support" section at the bottom of the page for full details on our 3-year reliability guarantee.

Yes, these are common symptoms of a failing coil (Code P0300-P0308). Review the "Product Highlights" section to see how our high-voltage output restores smooth engine performance.