2019-2023 Ram 1500 Classic 3.6L V6/5.7L V8 | Rear Drive Shaft | 52123638AA - PHILTOP

2019-2023 Ram 1500 Classic 3.6L V6/5.7L V8 | Rear Drive Shaft | 52123638AA - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.9

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
79ISDSA1637US

Specifications

Brand
PHILTOP
Mounting Type
Flange Mount
Position
Rear
Fully Extended Length
73.86 in/1876 mm
Fully Compressed Length
73.86 in/1876 mm
Shaft Diameter
Φ90
Items Included
1x Drive Shaft - 976041
Surface Finish
Painted
Flange Shape
Square
Output Shaft Spline Count
32-1T
Bolt Hole Quantity
4
Two-Piece Design
No
Adjustable Length
No
Tube Wall Thickness
0.12 in/3 mm
Shaft Material
Steel
Warranty Period
2-Year
OE Number
52123638AA,52123986AA,68334774AA,68334774AB,976041

Highlights

  • (Vehicle Fitments)Fits for Ram 2013-2018 1500 3.6/5.7L 4WD 8-speed(WheelBase:140.5), 2019-2023 1500 Classic 3.6/5.7L 4WD(WheelBase:140.5)
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 73.86 inch; ③Compressed Shaft Length: 73.86 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ90; ⑥Shaft Wall Thickness: 0.118 inch;⑦Length is measured end to end across the entire driveshaft
  • (Reference Number)52123638AA,52123986AA,68334774AA,68334774AB,976041
  • (Attention)①Mounting Type: Flange mounting; ②Flange Type: Square Shape; ③Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Long-Term Sealing & Oil Retention) High-precision oil seals help keep grease in critical working areas. This design supports longer intervals between lubrication events

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2014 - 20182014 - 201620182014 - 20182014 - 201620182014 - 20182014 - 201620182014 - 20152014 - 201620182015 - 201620182014 - 20182014 - 201620182013 - 20162013 - 20162015 - 20182015 - 201620182013 - 20182013 - 201620182017 - 20182013 - 201620182013 - 20182013 - 2016201820192019 - 20222020 - 202220192019 - 20222020 - 20222020 - 20232019 - 20232020 - 20232019 - 20232020 - 2023
MakeRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRamRam
Model15001500150015001500150015001500150015001500150015001500150015001500150015001500150015001500150015001500150015001500150015001500 Classic1500 Classic1500 Classic1500 Classic1500 Classic1500 Classic1500 Classic1500 Classic1500 Classic1500 Classic1500 Classic
TrimBig HornBig HornBig HornExpressExpressExpressLaramieLaramieLaramieLaramie LimitedLaramie LonghornLaramie LonghornLimitedLimitedLone StarLone StarLone StarOutdoorsmanOutdoorsmanRebelRebelRebelSLTSLTSLTSportSportSportTradesmanTradesmanTradesmanBig HornExpressExpressLone StarSLTSLTSpecial ServiceTradesmanTradesmanWarlockWarlock
Engine3.6L V65.7L V85.7L V83.6L V65.7L V85.7L V83.6L V65.7L V85.7L V85.7L V85.7L V85.7L V85.7L V85.7L V83.6L V65.7L V85.7L V83.6L V65.7L V83.6L V65.7L V85.7L V83.6L V65.7L V85.7L V83.6L V65.7L V85.7L V83.6L V65.7L V85.7L V83.6L V63.6L V65.7L V83.6L V63.6L V65.7L V85.7L V83.6L V65.7L V83.6L V65.7L V8
Note------------------------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.9/5

Based on 8 reviews

588%
413%
30%
20%
10%

Sldcmike

08/09/2026

Verified buyer

Perfect fit, perfect balance, quality built

Chris_GearHead_189

06/22/2026

Installation was pretty straightforward, fit perfectly. Feels like a really high-quality part, especially considering how much I paid. Big improvement over the old one.

FAQS

No FAQs have been added for this product yet.