2015-2017/2019 Dodge Challenger 6.4L V8/5.7L V8 | Rear Drive Shaft | 986220 - PHILTOP

2015-2017/2019 Dodge Challenger 6.4L V8/5.7L V8 | Rear Drive Shaft | 986220 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
78ISDSA1967US

Specifications

Brand
PHILTOP
Mounting Type
Cv Joint to Cv Joint
Position
Rear
Fully Extended Length
66.02 in/1677 mm
Fully Compressed Length
63.86 in/1622 mm
Shaft Diameter
Φ73/63.5
Items Included
1x Drive Shaft - 986220
Surface Finish
Painted
Two-Piece Design
Yes
Adjustable Length
Yes
Tube Wall Thickness
0.08 in/2 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
986220

Highlights

  • (Vehicle Fitments)Fits for Dodge 2015-2017,2019 Challenger 5.7/6.4L with Automatic
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 66.02 inch; ③Compressed Shaft Length: 63.86 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ73/63.5; ⑥Shaft Wall Thickness: 0.079 inch; ⑦Length is measured end to end across the entire driveshaft
  • (Reference Number)986220,52123980AC,52123980AD,52123980AE,52123980AF,68272626AD,68272626AC,68272626AB,68272626AA,52123980AG
  • (Attention)①Mounting Type: Ball Cage + Ball Cage; ②Design: Two-Piece; ③Adjustable Length for Custom Fit; ④Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (End-to-End Quality Control) The production cycle is monitored with quality inspections at each stage, from material sourcing to final dispatch. These measures help verify that all drive shafts meet OEM-specified criteria

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20162015 - 20172019201720192015 - 201620162016 - 20172019201920162015 - 2017201520172017
MakeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodge
ModelChallengerChallengerChallengerChallengerChallengerChallengerChallengerChallengerChallengerChallengerChallengerChallengerChallengerChallengerChallenger
Trim392 Hemi Scat Pack ShakerR/TR/TR/T 392R/T 392R/T PlusR/T Plus ShakerR/T Scat PackR/T Scat PackR/T Scat Pack WidebodyR/T ShakerSRT 392Scat PackT/AT/A 392
Engine6.4L V85.7L V85.7L V86.4L V86.4L V85.7L V85.7L V86.4L V86.4L V86.4L V85.7L V86.4L V86.4L V85.7L V86.4L V8
Note---------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.5/5

Based on 4 reviews

575%
40%
325%
20%
10%

Steve_DIYer_563

11/29/2025

Arrived way sooner than I thought it would, and the packaging protected it perfectly. Customer service was fantastic when I reached out with a question. Couldn't be happier.

SarahDrives_104

01/28/2026

Installation was a breeze, much easier than I expected. It fits perfectly and feels like a high-quality replacement. Much better than the old worn-out one.

FAQS

No FAQs have been added for this product yet.