2015-2019 Dodge Charger 5.7L V8/6.4L V8 | Rear Drive Shaft | 986041 - PHILTOP

2015-2019 Dodge Charger 5.7L V8/6.4L V8 | Rear Drive Shaft | 986041 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
80ISDSA1917US

Specifications

Brand
PHILTOP
Mounting Type
Cv Joint Mount
Position
Rear
Fully Extended Length
69.69 in/1770 mm
Fully Compressed Length
68.11 in/1730 mm
Shaft Diameter
Φ76
Items Included
1x Drive Shaft - 986041
Surface Finish
Painted
Two-Piece Design
Yes
Adjustable Length
Yes
Tube Wall Thickness
0.07 in/1.8 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
986041

Highlights

  • (Vehicle Fitments)Fits for Dodge 2015-2016 Charger R/T Road & Track, 2015-2016 Charger R/T Scat Pack/SRT 392, 2015-2019 Charger R/T, 2017-2018 Charger Daytona
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 69.69 inch; ③Compressed Shaft Length: 68.11 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ76; ⑥Shaft Wall Thickness: 0.071 inch; ⑦Length is measured end to end across the entire driveshaft
  • (Reference Number)986041,52123977AB,52123977AC,52123977AG,52123977AF,52123977AE,52123977AD
  • (Attention)①Mounting Type: Ball Cage Mount; ②Design: Two-Piece; ③Adjustable Length for Custom Fit; ④Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Verified Durability Testing) Each unit is subjected to fatigue and torque testing under real-world driving conditions to help verify its performance characteristics over time

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2017 - 20182015 - 20192015 - 20162015 - 20162015 - 2016
MakeDodgeDodgeDodgeDodgeDodge
ModelChargerChargerChargerChargerCharger
TrimDaytonaR/TR/T Road & TrackR/T Scat PackSRT 392
Engine5.7L V85.7L V85.7L V86.4L V86.4L V8
Note-----

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.5/5

Based on 6 reviews

567%
417%
317%
20%
10%

Amanda_MomOfThree_353

12/23/2025

Installed this and it was a breeze. It lined up perfectly with the differential and transmission mounts. Feels much better than the old, clunky one. Big improvement.

CarGuy_John_790

10/23/2025

Popped this in and it fit like a glove. Much better than the worn-out one I pulled out. Feels solid and balanced, way better than some other brands I've tried.

FAQS

No FAQs have been added for this product yet.