2015-2020 Dodge Charger 3.6L V6 | Rear Drive Shaft | 986955 - PHILTOP

2015-2020 Dodge Charger 3.6L V6 | Rear Drive Shaft | 986955 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
21ISDSA2077US

Specifications

Brand
PHILTOP
Mounting Type
Cv Joint Mount
Position
Rear
Fully Extended Length
75.75 in/1924 mm
Fully Compressed Length
74.57 in/1894 mm
Shaft Diameter
Φ76
Items Included
1x Drive Shaft - 986955
Surface Finish
Painted
Two-Piece Design
Yes
Adjustable Length
Yes
Tube Wall Thickness
0.07 in/1.8 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
986955

Highlights

  • (Vehicle Fitments)Fits for Dodge 2015-2020 Charger 3.6L RWD Enforcer/Pursuit
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 75.75 inch; ③Compressed Shaft Length: 74.57 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ76; ⑥Shaft Wall Thickness: 0.071 inch; ⑦Length is measured end to end across the entire driveshaft
  • (Reference Number)986955,68212029AB,68212029AC,68212029AF,68212029AE,68212029AD,68212029AG
  • (Attention)①Mounting Type: Ball Cage Mount; ②Design: Two-Piece; ③Adjustable Length for Custom Fit; ④Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (End-to-End Quality Control) From the initial sourcing of raw materials to the final shipping process, each phase includes dedicated quality inspections. This systematic approach helps ensure that finished products match OEM requirements

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2015 - 2020
MakeDodge
ModelCharger
TrimPursuit
Engine3.6L V6
Note-

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

5.0/5

Based on 3 reviews

5100%
40%
30%
20%
10%

Tom_Handy_988

06/17/2026

Installation was a breeze, honestly. All the mounting points lined up perfectly, and it felt much more solid than the original. Definitely an upgrade.

Ashley_RoadTrip_524

02/01/2026

Looks awesome, really well-made. For the price, this is an absolute steal. Feels solid and should last a long time. Great value.

FAQS

No FAQs have been added for this product yet.