2004-2012 Chevrolet Colorado 2.8L L4 | Rear Drive Shaft | 946040 - PHILTOP

2004-2012 Chevrolet Colorado 2.8L L4 | Rear Drive Shaft | 946040 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
62ISDSA1417US

Specifications

Brand
PHILTOP
Mounting Type
Slip Yoke + Universal Joint (U-Joint)
Position
Rear
Fully Extended Length
62.52 in/1588 mm
Fully Compressed Length
62.52 in/1588 mm
Shaft Diameter
Φ90
Items Included
1x Drive Shaft - 946040
Surface Finish
Painted
Output Shaft Spline Count
27-1T
Two-Piece Design
No
Universal Joint Size
Φ28.6*62-Φ28.6*92
Adjustable Length
No
Tube Wall Thickness
0.12 in/3 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
946040

Highlights

  • (Vehicle Fitments)Fits 2004-2012 Colorado/Canyon 4WD
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 62.52 inch; ③Compressed Shaft Length: 62.52 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ90; ⑥Shaft Wall Thickness: 0.118 inch; ⑦U-Joint Size: Φ28.6*62-Φ28.6*92; ⑧Length is measured end to end across the entire driveshaft
  • (Reference Number)946040,15176137,15126589,25787947,15116624
  • (Attention)①Mounting Type: Slip Yoke + Universal Joint; ②Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Professional Protective Packaging) The product is packed with a multi-layer protective structure, designed to help reduce impact-related damage and keep its shape during delivery

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20042004200420062007 - 200820042007 - 200820062007 - 201220062007 - 2012200520052005200520062007 - 201220062007 - 20122004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052004 - 2005200420062007 - 20082004200420062007 - 2012200420062007 - 20122008 - 2009201220062007 - 201220062007 - 201220062007 - 20122004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052004 - 2005
MakeChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMC
ModelColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyon
TrimBaseBaseLSLSLSLSLSLTLTLTLTSportSportSport LSSport LSWTWTWTWTZ71Z71Z71 LSZ71 LSZ85Z85Z85 LSZ85 LSSLSLSLSLSLESLESLESLESLESLESLTSLTSLTSLTWTWTWTWTZ71 FleetZ71 FleetZ71 SLZ71 SLZ71 SLEZ71 SLEZ85 SLZ85 SLZ85 SLEZ85 SLE
Engine2.8L L43.5L L52.8L L42.8L L42.9L L43.5L L53.7L L52.8L L42.9L L43.5L L53.7L L52.8L L43.5L L52.8L L43.5L L52.8L L42.9L L43.5L L53.7L L52.8L L43.5L L52.8L L43.5L L52.8L L43.5L L52.8L L43.5L L52.8L L42.8L L42.9L L43.5L L52.8L L42.8L L42.9L L43.5L L53.5L L53.7L L52.9L L42.9L L43.5L L53.7L L52.8L L42.9L L43.5L L53.7L L52.8L L43.5L L52.8L L43.5L L52.8L L43.5L L52.8L L43.5L L52.8L L43.5L L5
Note-------------------------------------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

5.0/5

Based on 2 reviews

5100%
40%
30%
20%
10%

Jason_Trucks_529

05/23/2026

Arrived well-packaged and super fast, which I really appreciated. The part itself looks great and feels very well-made. Customer service was a pleasure to deal with.

Ashley_RoadTrip_944

11/27/2025

Installing this was way easier than I thought it would be. It fit perfectly and felt really secure. A much better and cheaper option than what the local shops quoted me.

FAQS

No FAQs have been added for this product yet.