2006-2012 Chevrolet Colorado 2.8L L4 | Rear Drive Shaft | 936033 - PHILTOP

2006-2012 Chevrolet Colorado 2.8L L4 | Rear Drive Shaft | 936033 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.9

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
60ISDSA0087US

Specifications

Brand
PHILTOP
Mounting Type
Slip Yoke + Universal Joint (U-Joint)
Position
Rear
Fully Extended Length
74.92 in/1903 mm
Fully Compressed Length
74.92 in/1903 mm
Shaft Diameter
Φ73
Items Included
1x Drive Shaft - 936033
Surface Finish
Painted
Output Shaft Spline Count
27-1T
Two-Piece Design
Yes
Universal Joint Size
Φ28.6*62-Φ28.6*92
Adjustable Length
No
Tube Wall Thickness
0.08 in/2 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
936033

Highlights

  • (Vehicle Fitments)Fits for Chevrolet 2006-2012 Colorado RWD(WheelBase:126.0); for GMC 2004-2005 Canyon RWD(WheelBase:125.9), 2006-2012 Canyon RWD(WheelBase:126.0)
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 74.92 inch; ③Compressed Shaft Length: 74.92 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ73; ⑥Shaft Wall Thickness: 0.079 inch; ⑦U-Joint Size: Φ28.6*62-Φ28.6*92; ⑧Length is measured end to end across the entire driveshaft
  • (Reference Number)936033,15236807,8152368070,15120406,15173140,8257879480,25787948,21993621
  • (Attention)①Mounting Type: Slip Yoke + Universal Joint; ②Design: Two-Piece; ③Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Precision Dynamic Balancing)Each drive shaft is tested with high-speed dynamic balancing before shipment, ensuring smooth operation without vibration and reducing abnormal drivetrain wear

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20062007 - 20082007 - 200820062007 - 201220062007 - 20122009 - 201220062007 - 201220062007 - 2012200420062007 - 20082004200420062007 - 2012200420062007 - 20122009 - 20122008 - 2009201220062007 - 20122009 - 201220062007 - 201220062007 - 20122004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052004 - 20052004 - 2005
MakeChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMC
ModelColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoColoradoCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyonCanyon
TrimLSLSLSLTLTLTLTLTWTWTWTWTSLSLSLSLSLESLESLESLESLESLESLESLTSLTSLTSLTSLTWTWTWTWTZ71 FleetZ71 FleetZ71 SLZ71 SLZ71 SLEZ71 SLEZ85 SLZ85 SLZ85 SLEZ85 SLE
Engine2.8L L42.9L L43.7L L52.8L L42.9L L43.5L L53.7L L55.3L V82.8L L42.9L L43.5L L53.7L L52.8L L42.8L L42.9L L43.5L L52.8L L42.8L L42.9L L43.5L L53.5L L53.7L L55.3L V82.9L L42.9L L43.5L L53.7L L55.3L V82.8L L42.9L L43.5L L53.7L L52.8L L43.5L L52.8L L43.5L L52.8L L43.5L L52.8L L43.5L L52.8L L43.5L L5
Note
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly
2 Piece Shaft Assembly

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.9/5

Based on 7 reviews

586%
414%
30%
20%
10%

Brad Wilson

09/04/2026

Verified buyer

I picked up this PHILTOP front drive shaft for the 4L80E swap I'm doing on my 2005 Silverado 1500. Since changing transmissions affects the drivetrain setup, finding the right shaft for the swap was an important part of getting everything together. My initial impression of this shaft is excellent. It feels substantial and well made, the welds look clean, and the overall finish is better than I expected. The mounting areas and splines look nicely machined, and I didn't see any obvious quality issues when I inspected it. I also like being able to buy a complete shaft rather than trying to piece together or modify an old one. Even though the listed applications are primarily GM 2500 and 3500 trucks, the dimensions and configuration are what I needed for my particular 4L80E swap. I haven't put enough miles on the completed setup to comment on long term durability, but everything about the shaft looks promising so far. For anyone doing a similar drivetrain swap, definitely verify your own measurements and configuration rather than ordering strictly by vehicle application. For my 2005 Silverado 1500 4L80E project, this was exactly what I was looking for.

DaveTheMechanic_839

11/10/2025

Came quickly and the packaging was really secure. Nothing was loose or damaged. I appreciated how helpful the customer service team was when I called.

FAQS

No FAQs have been added for this product yet.