2007-2010 Ford Explorer Sport Trac 4.0L V6 | Rear Drive Shaft | 936896 - PHILTOP

2007-2010 Ford Explorer Sport Trac 4.0L V6 | Rear Drive Shaft | 936896 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
55ISDSA0757US

Specifications

Brand
PHILTOP
Mounting Type
Flange + Cv Joint Mount
Position
Rear
Fully Extended Length
66.34 in/1685 mm
Fully Compressed Length
64.29 in/1633 mm
Shaft Diameter
Φ73/63.5
Items Included
1x Drive Shaft - 936896
Surface Finish
Painted
Flange Shape
Square
Bolt Hole Quantity
4
Two-Piece Design
Yes
Adjustable Length
Yes
Tube Wall Thickness
0.08 in/2 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
936896

Highlights

  • (Vehicle Fitments)Fits for Ford 2007-2010 Explorer Sport Trac 4WD
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 66.33 inch; ③Compressed Shaft Length: 64.29 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ73/63.5; ⑥Shaft Wall Thickness: 0.079 inch; ⑦Length is measured end to end across the entire driveshaft
  • (Reference Number)936896,7A2Z4R602K,7A2Z4R602G,7A2Z4R602D
  • (Attention)①Mounting Type: Flange Mount + Ball Cage Mount; ②Flange Type: Square Shape; ③Design: Two-Piece; ④Adjustable Length for Custom Fit; ⑤Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Quiet Operation Design)The system utilizes precision bearings and premium grease, supported by rigorous tolerance regulation. These features are designed to help lower driving-related noise

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2007 - 20102007 - 20102007 - 20102007 - 2010
MakeFordFordFordFord
ModelExplorer Sport TracExplorer Sport TracExplorer Sport TracExplorer Sport Trac
TrimLimitedLimitedXLTXLT
Engine4.0L V64.6L V84.0L V64.6L V8
Note----

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

Jason_Trucks_824

06/26/2026

Looks fantastic, really clean finish. Feels like a high-quality part, especially for the price. It's a significant upgrade for my Sport Trac.

Chris_GearHead_937

01/15/2026

I'm not a mechanic, but I managed to get this installed without too much trouble. It's a solid upgrade compared to others on the market, and the price is right.

FAQS

No FAQs have been added for this product yet.