2004-2008 Ford F-150 5.4L V8/4.6L V8 | Rear Drive Shaft | 946816 - PHILTOP

2004-2008 Ford F-150 5.4L V8/4.6L V8 | Rear Drive Shaft | 946816 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
98ISDSA1607US

Specifications

Brand
PHILTOP
Mounting Type
Flange Mount
Position
Rear
Fully Extended Length
73.15 in/1858 mm
Fully Compressed Length
73.15 in/1858 mm
Shaft Diameter
Φ89
Items Included
1x Drive Shaft - 946816
Surface Finish
Painted
Flange Shape
Square
Bolt Hole Quantity
4
Two-Piece Design
No
Universal Joint Size
φ30.18*92
Adjustable Length
Yes
Tube Wall Thickness
0.08 in/2 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
946816

Highlights

  • (Vehicle Fitments)Fits 2004-2004 F-150 4WD WheelBase:144.4, 2004-2005 F-150 4WD WheelBase:144.7, 2006-2008 F-150 4WD WheelBase:144
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 73.15 inch; ③Compressed Shaft Length: 73.15 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ89; ⑥Shaft Wall Thickness: 0.079 inch; ⑦U-Joint Size: φ30.18*92; ⑧Length is measured end to end across the entire driveshaft
  • (Reference Number)946816,5L3Z4602MA
  • (Attention)①Mounting Type: Flange mounting; ②Flange Type: Square Shape; ③Adjustable Length for Custom Fit; ④Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Professional After-Sales Support) Support resources are offered after sale to help answer standard installation and usage questions

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2005 - 20082004 - 20082004 - 2008200820082004 - 20082004 - 20082004 - 20082004 - 2008
MakeFordFordFordFordFordFordFordFordFord
ModelF-150F-150F-150F-150F-150F-150F-150F-150F-150
TrimFX4LariatSTXTHE 60TH ANNIVERSARY EDITIONTHE 60TH ANNIVERSARY EDITIONXLXLXLTXLT
Engine5.4L V85.4L V84.6L V84.6L V85.4L V84.6L V85.4L V84.6L V85.4L V8
Note
9.75 In. Rear Axle;w/12 Bolt Cover
9.75 In. Rear Axle;w/12 Bolt Cover
9.75 In. Rear Axle;w/12 Bolt Cover
9.75 In. Rear Axle;w/12 Bolt Cover
9.75 In. Rear Axle;w/12 Bolt Cover
----

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

Tom_Handy_109

06/08/2026

Super quick shipping and it arrived in perfect condition, well protected. Customer service was excellent when I called with a minor question. Very satisfied.

Jason_Trucks_389

06/09/2026

Wasn't too difficult to get installed, fit perfectly on my F-150. It feels much more solid than the old one. Definitely a worthwhile upgrade.

FAQS

No FAQs have been added for this product yet.