2009-2014 Ford F-150 5.0L V8/5.4L V8/6.2L V8/4.6L V8 | Rear Drive Shaft | 936809 - PHILTOP

2009-2014 Ford F-150 5.0L V8/5.4L V8/6.2L V8/4.6L V8 | Rear Drive Shaft | 936809 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
10ISDSA0697US

Specifications

Brand
PHILTOP
Mounting Type
Flange Mount
Position
Rear
Fully Extended Length
90.31 in/2294 mm
Fully Compressed Length
89.13 in/2264 mm
Shaft Diameter
Φ76
Items Included
1x Drive Shaft - 936809
Surface Finish
Painted
Flange Shape
Square
Bolt Hole Quantity
4
Two-Piece Design
Yes
Universal Joint Size
φ30.18*92
Adjustable Length
Yes
Tube Wall Thickness
0.07 in/1.8 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
936809

Highlights

  • (Vehicle Fitments)Fits for Ford 2009-2010 F-150 4WD Crew Cab(BedLenth:78.8,WheelBase:157.0;9.75 In. Axle; w/12 Bolt Differential Cover), 2011-2014 F-150 5.0L 4WD Crew Cab(BedLenth:78.8,WheelBase:157.0), 2012-2014 F-150 6.2L 4WD Crew Cab(BedLenth:78.8,WheelBase:157.0)
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 90.31 inch; ③Compressed Shaft Length: 89.13 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: φ76; ⑥Shaft Wall Thickness: 0.071 inch; ⑦U-Joint Size: φ30.18*92; ⑧Length is measured end to end across the entire driveshaft
  • (Reference Number)936809,DL3Z4R602AN,DL3Z4R602L,BL3Z4R602L,AL3Z4R602KB,AL3Z4R602KA,9L3Z4R602LF,9L3Z4R602L,DL3Z4R602Z
  • (Attention)①Mounting Type: Flange mounting; ②Flange Type: Square Shape; ③Design: Two-Piece; ④Adjustable Length for Custom Fit; ⑤Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Quiet Operation Design) Precision bearings and high-quality grease are paired with tight tolerance control. This combination helps reduce unwanted noise during operation

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2011 - 20142009 - 20102013 - 20142011 - 20142009 - 20102011 - 20142009 - 20102012 - 20142011 - 20142009 - 20102012 - 20142009 - 20102011 - 20142009 - 20102009 - 20102011 - 20142009 - 20102013 - 2014
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFord
ModelF-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150
TrimFX4FX4FX4King RanchKing RanchLariatLariatLariatPlatinumPlatinumPlatinumXLXLXLXLTXLTXLTXLT
Engine5.0L V85.4L V86.2L V85.0L V85.4L V85.0L V85.4L V86.2L V85.0L V85.4L V86.2L V84.6L V85.0L V85.4L V84.6L V85.0L V85.4L V86.2L V8
Note-
9.75 In. Axle;w/12 Bolt Differential Cover
--
9.75 In. Axle;w/12 Bolt Differential Cover
-
9.75 In. Axle;w/12 Bolt Differential Cover
--
9.75 In. Axle;w/12 Bolt Differential Cover
-
9.75 In. Axle;w/12 Bolt Differential Cover
-
9.75 In. Axle;w/12 Bolt Differential Cover
9.75 In. Axle;w/12 Bolt Differential Cover
-
9.75 In. Axle;w/12 Bolt Differential Cover
-

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.6/5

Based on 9 reviews

567%
422%
311%
20%
10%

DaveTheMechanic_632

03/30/2026

This drive shaft looks amazing, really clean welds and a nice finish. For the price, it's an absolute steal. Feels way more expensive than it was.

DaveTheMechanic_398

12/30/2025

Arrived lightning fast and packed really well. Seriously, the box looked like it could survive a tornado. Customer service was top-notch, very helpful.

FAQS

No FAQs have been added for this product yet.