2002 Ford Excursion 6.8L V10 | Rear Drive Shaft | 946311 - PHILTOP

2002 Ford Excursion 6.8L V10 | Rear Drive Shaft | 946311 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
15ISDSA1537US

Specifications

Brand
PHILTOP
Mounting Type
Flange Mount
Position
Rear
Fully Extended Length
57.36 in/1457 mm
Fully Compressed Length
54.02 in/1372 mm
Shaft Diameter
Φ89
Items Included
1x Drive Shaft - 946311
Surface Finish
Painted
Flange Shape
Square
Bolt Hole Quantity
4
Two-Piece Design
No
Adjustable Length
Yes
Tube Wall Thickness
0.08 in/2 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
946311

Highlights

  • (Vehicle Fitments)Fits Ford 2002-2004 F-350 Super Duty 6.8L 4WD Standard Cab Automatic(From 1/06/2002;w/ Single Wheel (SRW)), 2005-2007 F-350 Super Duty 5.4/6.8L 4WD Standard Cab(w/ Single Wheel (SRW)), 2002-2002 Excursion 6.8L 4WD(From 1/06/2002)
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 57.36 inch; ③Compressed Shaft Length: 54.02 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ89; ⑥Shaft Wall Thickness: 0.079 inch; ⑦Length is measured end to end across the entire driveshaft
  • (Reference Number)946311,2C7Z4602BA,2C7Z4602BB
  • (Attention)①Mounting Type: Flange mounting; ②Flange Type: Square Shape; ③Adjustable Length for Custom Fit; ④Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Professional After-Sales Support) After-sales support is available to help with common installation and usage questions

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200220022005 - 20072002 - 20042005 - 20072005 - 20072002 - 20042005 - 2007
MakeFordFordFordFordFordFordFordFord
ModelExcursionExcursionF-350 Super DutyF-350 Super DutyF-350 Super DutyF-350 Super DutyF-350 Super DutyF-350 Super Duty
TrimLimitedXLTXLXLXLXLTXLTXLT
Engine6.8L V106.8L V105.4L V86.8L V106.8L V105.4L V86.8L V106.8L V10
Note
From 1/06/2002
From 1/06/2002
w/ Single Rear Wheel (SRW)
From 1/06/2002;w/ Single Rear Wheel (SRW)
w/ Single Rear Wheel (SRW)
w/ Single Rear Wheel (SRW)
From 1/06/2002;w/ Single Rear Wheel (SRW)
w/ Single Rear Wheel (SRW)

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.6/5

Based on 5 reviews

580%
40%
320%
20%
10%

AutoMom_2019_18

05/05/2026

The appearance of this drive shaft is fantastic, really solid build. For the price, it's an absolute no-brainer. It was well-packaged and got here quickly, too.

Nancy_FirstCar_549

04/08/2026

This part is a great value. It looks just like the factory part but cost way less. The installation was smooth sailing, no issues at all. My truck is running like new.

FAQS

No FAQs have been added for this product yet.