2007-2012 Ford Fusion 2.5L/2.3L/3.0L/3.5L | Rear Drive Shaft | 936811 - PHILTOP

2007-2012 Ford Fusion 2.5L/2.3L/3.0L/3.5L | Rear Drive Shaft | 936811 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
93ISDSA0707US

Specifications

Brand
PHILTOP
Mounting Type
Flange + Cv Joint Mount
Position
Rear
Fully Extended Length
80.85 in/2053.5 mm
Fully Compressed Length
79.21 in/2012 mm
Shaft Diameter
Φ63.5/51
Items Included
1x Drive Shaft - 936811
Surface Finish
Painted
Flange Shape
Square
Bolt Hole Quantity
4
Two-Piece Design
Yes
Adjustable Length
Yes
Tube Wall Thickness
0.08 in/2 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
936811

Highlights

  • (Vehicle Fitments)Fits for Ford 2007-2012 Fusion with Automatic/Manual, for Mercury 2007-2011 Milan with Automatic/Manual,for Lincoln 2007-2012 MKZ with Automatic
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 80.84 inch; ③Compressed Shaft Length: 79.21 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ63.5/51; ⑥Shaft Wall Thickness: 0.079 inch; ⑦Length is measured end to end across the entire driveshaft
  • (Reference Number)936811,AE5Z4R602A,7E5Z4R602A
  • (Attention)①Mounting Type: Flange Mount + Ball Cage Mount; ②Flange Type: Square Shape; ③Design: Two-Piece; ④Adjustable Length for Custom Fit; ⑤Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Quiet Operation Design) This design incorporates precision bearings, premium grease, and strict tolerance management. These elements work together to help keep driving noise at lower levels

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20112007 - 20092010 - 20122007 - 20092010 - 20122007 - 20122007 - 20092010 - 20122007 - 20122010 - 20122007 - 20122007 - 20092010 - 20112007 - 20092007 - 20092010 - 20112007 - 2011
MakeFordFordFordFordFordFordFordFordFordFordLincolnMercuryMercuryMercuryMercuryMercuryMercury
ModelFusionFusionFusionFusionFusionFusionFusionFusionFusionFusionMKZMilanMilanMilanMilanMilanMilan
TrimHybridSSSESESESELSELSELSportBaseBaseBaseBasePremierPremierPremier
Engine2.5L L42.3L L42.5L L42.3L L42.5L L43.0L V62.3L L42.5L L43.0L V63.5L V63.5L V62.3L L42.5L L43.0L V62.3L L42.5L L43.0L V6
Note
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft
2 Piece Replacement;Replaces Original 3 Piece Shaft

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.5/5

Based on 8 reviews

563%
425%
313%
20%
10%

Steve_DIYer_336

03/08/2026

Fit perfectly, installation was no problem at all. Much better than the worn out one I had. A solid replacement part.

Ashley_RoadTrip_267

10/11/2025

Came really fast and was packaged securely. Had a quick question for customer service and they were super helpful and polite.

FAQS

No FAQs have been added for this product yet.