2008-2012 Jeep Liberty 3.7L V6 | Rear Drive Shaft | 936071 - PHILTOP

2008-2012 Jeep Liberty 3.7L V6 | Rear Drive Shaft | 936071 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
72ISDSA0157US

Specifications

Brand
PHILTOP
Mounting Type
Flange Mount
Position
Rear
Fully Extended Length
40.55 in/1030 mm
Fully Compressed Length
37.2 in/945 mm
Shaft Diameter
Φ73
Items Included
1x Drive Shaft - 936071
Surface Finish
Painted
Flange Shape
Square
Bolt Hole Quantity
4
Two-Piece Design
No
Adjustable Length
Yes
Tube Wall Thickness
0.08 in/2 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
936071

Highlights

  • (Vehicle Fitments)Fits for Jeep 2006-2010 Commander 3.7L 4WD(NV245 Quadra-Trac II Transfer Case), 2006-2010 Commander 4.7/5.7L 4WD, 2005-2009 Grand Cherokee 4.7/5.7L AWD, 2006-2008 Grand Cherokee 3.7L AWD(NV245 Quadra-Trac II Transfer Case), 2008-2012 Liberty 4WD Automatic
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 40.55 inch; ③Compressed Shaft Length: 37.20 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ73; ⑥Shaft Wall Thickness: 0.079 inch; ⑦Length is measured end to end across the entire driveshaft
  • (Reference Number)936071,52105760AC,52853436AB,RL105760AF,52105760AD,52853436AC,52105760AF,52105760AE
  • (Attention)①Mounting Type: Flange mounting; ②Flange Type: Square Shape; ③Adjustable Length for Custom Fit; ④Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Precision Dynamic Balancing) High-speed dynamic balancing is performed on every drive shaft prior to dispatch. The procedure is designed to minimize vibration during operation and promote consistent wear characteristics across drivetrain components

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200620062006 - 20072006 - 20072006 - 20092006 - 20102007 - 20092007 - 20102007 - 20092010200620062006 - 200820052006 - 2008200920052006 - 2008200920052006 - 200820092006 - 2008200920122008 - 20122010 - 20112008 - 2012
MakeJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeep
ModelCommanderCommanderCommanderCommanderCommanderCommanderCommanderCommanderCommanderCommanderGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeLibertyLibertyLibertyLiberty
Trim65th Anniversary Edition65th Anniversary EditionBaseBaseLimitedLimitedOverlandSportSportSport65th Anniversary Edition65th Anniversary EditionLaredoLaredoLaredoLaredoLimitedLimitedLimitedLimitedLimitedLimitedOverlandOverlandJetLimitedRenegadeSport
Engine3.7L V64.7L V83.7L V64.7L V84.7L V85.7L V85.7L V83.7L V64.7L V85.7L V83.7L V64.7L V83.7L V64.7L V84.7L V84.7L V84.7L V84.7L V84.7L V85.7L V85.7L V85.7L V85.7L V85.7L V83.7L V63.7L V63.7L V63.7L V6
Note
NV245 Quadra-Trac II Transfer Case
NV245 Quadra-Trac II Transfer Case
NV245 Quadra-Trac II Transfer Case
NV245 Quadra-Trac II Transfer Case
NV245 Quadra-Trac II Transfer Case
NV245 Quadra-Trac II Transfer Case
NV245 Quadra-Trac II Transfer Case
NV245 Quadra-Trac II Transfer Case
NV245 Quadra-Trac II Transfer Case
NV245 Quadra-Trac II Transfer Case
NV245 Quadra-Trac II Transfer Case
NV245 Quadra-Trac II Transfer Case
NV245 Quadra-Trac II Transfer Case
-
NV245 Quadra-Trac II Transfer Case
--
NV245 Quadra-Trac II Transfer Case
--
NV245 Quadra-Trac II Transfer Case
-
NV245 Quadra-Trac II Transfer Case
-
w/Sales Code DHL (Command-Trac II Part Time 4WD)
w/Sales Code DHL (Command-Trac II Part Time 4WD)
w/Sales Code DHL (Command-Trac II Part Time 4WD)
w/Sales Code DHL (Command-Trac II Part Time 4WD)

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

5.0/5

Based on 4 reviews

5100%
40%
30%
20%
10%

Commander Paul

08/12/2026

Verified buyer

This shaft in my hemi commander is working really well so far. Appears well made but I'll probably replace u joints with 269 or 1310s. Only first day!

CarGuy_John_611

01/22/2026

The finish is nice and it feels really robust. A great deal considering the quality. It fit my Grand Cherokee perfectly.

FAQS

No FAQs have been added for this product yet.