2007-2008 Kia Sorento 3.3L V6 | Rear Drive Shaft | 936210 - PHILTOP

2007-2008 Kia Sorento 3.3L V6 | Rear Drive Shaft | 936210 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
63ISDSA0297US

Specifications

Brand
PHILTOP
Mounting Type
Flange Mount
Position
Rear
Fully Extended Length
62.56 in/1589 mm
Fully Compressed Length
60.2 in/1529 mm
Shaft Diameter
Φ76
Items Included
1x Drive Shaft - 936210
Surface Finish
Painted
Flange Shape
Square
Bolt Hole Quantity
4
Two-Piece Design
Yes
Universal Joint Size
φ27*81.8
Adjustable Length
Yes
Tube Wall Thickness
0.07 in/1.8 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
936210

Highlights

  • (Vehicle Fitments)Fits for Kia 2007-2008 Sorento RWD
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 62.56 inch; ③Compressed Shaft Length: 60.20 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: φ76; ⑥Shaft Wall Thickness: 0.071 inch; ⑦U-Joint Size: φ27*81.8; ⑧Length is measured end to end across the entire driveshaft.⑦
  • (Reference Number)936210,491003E951
  • (Attention)①Mounting Type: Flange mounting; ②Flange Type: Square Shape; ③Design: Two-Piece; ④Adjustable Length for Custom Fit; ⑤Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Precision Dynamic Balancing)All drive shafts are subjected to high-speed dynamic balancing as part of our pre-shipment quality process. The procedure helps reduce running vibration and promotes uniform wear among moving parts

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200820072007 - 200820082007
MakeKiaKiaKiaKiaKia
ModelSorentoSorentoSorentoSorentoSorento
TrimBaseBaseEXLXLX
Engine3.3L V63.8L V63.8L V63.3L V63.8L V6
Note-----

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

Kelly_SUV_Life_975

10/22/2025

This drive shaft looks great, feels very durable. The price is unbeatable for this level of quality. It's a fantastic replacement part that doesn't break the bank. Highly recommend.

Jennifer_Auto_713

03/26/2026

Arrived super fast and was packaged very securely. The customer service team was really helpful when I called with a quick question. Great all-around experience from ordering to installation.

FAQS

No FAQs have been added for this product yet.