2002-2006 Chevrolet Avalanche 1500 5.3L V8 | Rear Drive Shaft | 946051 - PHILTOP

2002-2006 Chevrolet Avalanche 1500 5.3L V8 | Rear Drive Shaft | 946051 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
48ISDSA1437US

Specifications

Brand
PHILTOP
Mounting Type
Slip Yoke + Universal Joint (U-Joint)
Position
Rear
Fully Extended Length
62.05 in/1576 mm
Fully Compressed Length
62.05 in/1576 mm
Shaft Diameter
Φ90
Items Included
1x Drive Shaft - 946051
Surface Finish
Painted
Output Shaft Spline Count
32-2T
Two-Piece Design
No
Universal Joint Size
Φ28.6*62-Φ28.6*92
Adjustable Length
No
Tube Wall Thickness
0.12 in/3 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
946051

Highlights

  • (Vehicle Fitments)Fits 2000-2006 Suburban 1500, Avalanche 1500 4WD, Yukon XL 1500, 2004-2006 Escalade ESV, 2003-2006 Escalade EXT
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 62.05 inch; ③Compressed Shaft Length: 62.05 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ90; ⑥Shaft Wall Thickness: 0.118 inch; ⑦U-Joint Size: Φ28.6*62-Φ28.6*92; ⑧Length is measured end to end across the entire driveshaft
  • (Reference Number)946051,15713680,15109397
  • (Attention)①Mounting Type: Slip Yoke + Universal Joint; ②Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Double Leak-Proof Sealing) High-quality oil seals and precision assembly methods are used to help reduce the risk of grease leakage during use

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2004 - 20062003 - 20062002 - 20052005 - 20062005 - 20062002 - 200320032002 - 20062000 - 200120062000 - 20062000 - 200620062002 - 20062003 - 200620062000 - 20062000 - 2006
MakeCadillacCadillacChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletGMCGMCGMCGMC
ModelEscalade ESVEscalade EXTAvalanche 1500Avalanche 1500Avalanche 1500Avalanche 1500Avalanche 1500Avalanche 1500Suburban 1500Suburban 1500Suburban 1500Suburban 1500Suburban 1500Suburban 1500Yukon XL 1500Yukon XL 1500Yukon XL 1500Yukon XL 1500
TrimBaseBaseBaseLSLTNorth FaceWBHZ71BaseBaseLSLTLTZZ71DenaliSLSLESLT
Engine6.0L V86.0L V85.3L V85.3L V85.3L V85.3L V85.3L V85.3L V85.3L V85.3L V85.3L V85.3L V86.0L V85.3L V86.0L V85.3L V85.3L V85.3L V8
Note------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.8/5

Based on 4 reviews

575%
425%
30%
20%
10%

Mark1997

07/13/2026

Verified buyer

This drive shaft assembly is very well built and feels solid right out of the box. The materials and finish are high quality, and everything is precisely made for a proper fit. It looks durable, reliable, and comes well packaged for protection during shipping. Overall, it's an excellent replacement part with great quality and value.

RickFixIt_268

10/22/2025

The packaging was excellent, and it arrived ahead of schedule. Super impressed with the speed! Customer service was also very helpful and friendly when I had a question.

FAQS

No FAQs have been added for this product yet.