2000-2008 GMC Yukon 6.0L/6.2L/4.8L/5.3L | Rear Drive Shaft | 946052 - PHILTOP

2000-2008 GMC Yukon 6.0L/6.2L/4.8L/5.3L | Rear Drive Shaft | 946052 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
98ISDSA1447US

Specifications

Brand
PHILTOP
Mounting Type
Slip Yoke + Universal Joint (U-Joint)
Position
Rear
Fully Extended Length
48.03 in/1220 mm
Fully Compressed Length
48.03 in/1220 mm
Shaft Diameter
Φ73
Items Included
1x Drive Shaft - 946052
Surface Finish
Painted
Output Shaft Spline Count
32-1T
Two-Piece Design
No
Universal Joint Size
Φ28.6*62-Φ28.6*92
Adjustable Length
No
Tube Wall Thickness
0.08 in/2 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
946052

Highlights

  • (Vehicle Fitments)Fits Chevrolet 2000 Tahoe 4.8/5.3L 4WD, 2001-2008 Tahoe 4.8/5.3/6.2L 4WD,for GMC 2000 Yukon 4.8/5.3L 4WD, 2001-2008 Yukon 4.8/5.3L 4WD, 2003-2008 Yukon AWD, 2008 Yukon 6.2L RWD,for Cadillac 2003-2008 Escalade AWD
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 48.03 inch; ③Compressed Shaft Length: 48.03 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ73; ⑥Shaft Wall Thickness: 0.079 inch; ⑦U-Joint Size: Φ28.6*62-Φ28.6*92; ⑧Length is measured end to end across the entire driveshaft
  • (Reference Number)946052,15712400,15814472,15109402,10378152,15767176
  • (Attention)①Mounting Type: Slip Yoke + Universal Joint; ②Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Double Leak-Proof Sealing) The design incorporates quality oil seals and precise assembly to help contain grease and minimize seepage over time

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2003 - 20052003 - 20062007 - 2008200820002001200620002001200620002001 - 200820002001 - 200820002001 - 200420002001 - 20082007 - 200820082003 - 20042002 - 20062003 - 20062007 - 20082006200620002001 - 200820002001 - 200820002001 - 200520002001 - 2008
MakeCadillacCadillacCadillacCadillacChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMC
ModelEscaladeEscaladeEscaladeEscaladeTahoeTahoeTahoeTahoeTahoeTahoeTahoeTahoeTahoeTahoeTahoeTahoeTahoeTahoeTahoeTahoeTahoeTahoeYukonYukonYukonYukonYukonYukonYukonYukonYukonYukonYukonYukon
TrimBaseBaseBasePlatinumBaseBaseBaseBaseBaseBaseLSLSLSLSLTLTLTLTLTZLTZZ71Z71DenaliDenaliSLSLSLESLESLESLESLTSLTSLTSLT
Engine5.3L V86.0L V86.2L V86.2L V84.8L V84.8L V84.8L V85.3L V85.3L V85.3L V84.8L V84.8L V85.3L V85.3L V84.8L V84.8L V85.3L V85.3L V85.3L V86.2L V84.8L V85.3L V86.0L V86.2L V84.8L V85.3L V84.8L V84.8L V85.3L V85.3L V84.8L V84.8L V85.3L V85.3L V8
Note----
w/o RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)
--
w/o RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)
--
w/o RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)
-
w/o RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)
-
w/o RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)
-
w/o RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)
---------
w/o RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)
-
w/o RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)
-
w/o RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)
-
w/o RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)
-

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

DaveTheMechanic_47

04/26/2026

Putting this on was a lot easier than I anticipated. It lined up perfectly with the differential and transfer case. Way better than messing with the old, worn-out one.

CarGuy_John_279

03/07/2026

Looks great, feels very robust. For the price, this is an incredible value. I was expecting to pay a lot more for something this well-made.

FAQS

No FAQs have been added for this product yet.