2015-2019 Ford Transit-150 3.7L V6 | Rear Drive Shaft | 986267 - PHILTOP

2015-2019 Ford Transit-150 3.7L V6 | Rear Drive Shaft | 986267 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
68ISDSA1987US

Specifications

Brand
PHILTOP
Mounting Type
Flange Mount
Position
Rear
Fully Extended Length
98.44 in/2500.5 mm
Fully Compressed Length
95.1 in/2415.5 mm
Shaft Diameter
Φ73
Items Included
1x Drive Shaft - 986267
Surface Finish
Painted
Flange Shape
Square
Bolt Hole Quantity
4
Two-Piece Design
Yes
Adjustable Length
Yes
Tube Wall Thickness
0.08 in/2 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
986267

Highlights

  • (Vehicle Fitments)Fits for Ford 2015-2019 Transit-150/250 3.7L(WheelBase:130.0), 2017-2019 Transit-350 3.7L(WheelBase:130.0)
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 98.44 inch; ③Compressed Shaft Length: 95.10 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ73; ⑥Shaft Wall Thickness: 0.079 inch; ⑦Length is measured end to end across the entire driveshaft
  • (Reference Number)986267,CK4Z4R602BV,CK4Z4R602L,CK4Z4R602Y,CK4Z4R602BA,CK4Z4R602AD
  • (Attention)①Mounting Type: Flange mounting; ②Flange Type: Square Shape; ③Design: Two-Piece; ④Adjustable Length for Custom Fit; ⑤Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (End-to-End Quality Control) Quality control begins at the material sourcing stage and continues through to finished product shipping. Every drive shaft is inspected to confirm its adherence to OEM specifications

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2015 - 20192015 - 20192015 - 20192015 - 20192016 - 20192017 - 2019
MakeFordFordFordFordFordFord
ModelTransit-150Transit-150Transit-150Transit-250Transit-250Transit-350
TrimBaseXLXLTBasePTVBase
Engine3.7L V63.7L V63.7L V63.7L V63.7L V63.7L V6
Note
Conversion Shaft (Includes New Style Transmission Flange)
Conversion Shaft (Includes New Style Transmission Flange)
Conversion Shaft (Includes New Style Transmission Flange)
Conversion Shaft (Includes New Style Transmission Flange)
Conversion Shaft (Includes New Style Transmission Flange)
Conversion Shaft (Includes New Style Transmission Flange)

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.6/5

Based on 5 reviews

580%
40%
320%
20%
10%

Jason_Trucks_743

10/21/2025

Installation was a breeze. Fit perfectly on my van. It's a lot smoother than the old shaft, and I've heard good things about these compared to other brands.

Amanda_MomOfThree_151

10/16/2025

Came super fast, well protected in the box. Had a question about the install and the customer service folks were super helpful and friendly.

FAQS

No FAQs have been added for this product yet.