2009-2017 Chevrolet Traverse 3.6L V6 | Rear Drive Shaft | 976109 - PHILTOP

2009-2017 Chevrolet Traverse 3.6L V6 | Rear Drive Shaft | 976109 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
21ISDSA1657US

Specifications

Brand
PHILTOP
Mounting Type
Flange + Cv Joint Mount
Position
Rear
Fully Extended Length
62.87 in/1597 mm
Fully Compressed Length
60.08 in/1526 mm
Shaft Diameter
Φ63.5
Items Included
1x Drive Shaft - 976109
Surface Finish
Painted
Flange Shape
Square
Bolt Hole Quantity
4
Two-Piece Design
Yes
Adjustable Length
Yes
Tube Wall Thickness
0.08 in/2 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
976109

Highlights

  • (Vehicle Fitments)Fits for Chevrolet 2009-2017 Traverse AWD, for GMC 2007-2016 Acadia AWD, for Buick 2008-2017 Enclave AWD, for Saturn 2007-2010 Outlook AWD
  • (Reference Number)976109,20953605,22834245,15885332,25815077,25995545,25995544,23167530
  • (Specifications)①Installation Position: Rear Side; ②Extended Shaft Length: 62.87 inch; ③Compressed Shaft Length: 60.08 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ63.5; ⑥Shaft Wall Thickness: 0.079 inch; ⑦Length is measured end to end across the entire driveshaft; ⑧Mounting Type: Flange Mount + Ball Cage Mount; ⑨Flange Type: Square Shape; ⑩Design: Two-Piece; ⑪Adjustable Length for Custom Fit; ⑫Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Quiet Operation Design)The system utilizes precision bearings and premium grease, supported by rigorous tolerance regulation. These features are designed to help lower driving-related noise
  • (High Quality)From material selection through final packaging, each production stage follows established quality control procedures and inspections to help maintain consistent product quality and support OEM-style design standards

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2012 - 20132008 - 20112008 - 201120142014 - 20172014 - 20172009 - 20172009 - 20172009 - 201620172011 - 20162010 - 20132007 - 20162007 - 20162007 - 20102007 - 2010
MakeBuickBuickBuickBuickBuickBuickChevroletChevroletChevroletChevroletGMCGMCGMCGMCSaturnSaturn
ModelEnclaveEnclaveEnclaveEnclaveEnclaveEnclaveTraverseTraverseTraverseTraverseAcadiaAcadiaAcadiaAcadiaOutlookOutlook
TrimBaseCXCXLConvenienceLeatherPremiumLSLTLTZPremierDenaliSLSLESLTXEXR
Engine3.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V6
Note----------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.4/5

Based on 7 reviews

557%
429%
314%
20%
10%

Mike from Texas_986

02/01/2026

This drive shaft is a fantastic value. It looks great, feels sturdy, and was much cheaper than I expected. My Traverse runs so much smoother now, I'm really happy with this purchase.

Kelly_SUV_Life_125

01/22/2026

Super quick delivery and the packaging was excellent, everything arrived in perfect condition. I contacted customer support with a question and they were very responsive and helpful. Great service overall.

FAQS

No FAQs have been added for this product yet.