2008-2012 Ford Escape 2.3L/2.5L/3.0L | Rear Left Power Window Regulator w/Motor | 751712 - PHILTOP

2008-2012 Ford Escape 2.3L/2.5L/3.0L | Rear Left Power Window Regulator w/Motor | 751712 - PHILTOP

Powerful Motor

Upgraded Pulley & Cable

Quiet & Smooth Operation

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
73ISPWR3957US

Specifications

Brand
PHILTOP
Type
Power Window Regulator
Mode
Power, With Motor
Motor Included
Yes
Pin Quantity
2
Items Included
1x Rear Left Window Regulator - 751-712
Material
Stainless Steel
Torque
9 N·m
Input Voltage
13.5
Quantity
1
Motor Speed
90 RPM
Warranty Period
2-Year
Part Number
751712

Highlights

  • Vehicle Fitment: Window regulator and motor assembly compatible with 2008-2012 Ford Escape, 2008-2011 Mazda Tribute, 2008-2011 Mercury Mariner. Please MATCH your vehicle on the left top before purchasing
  • OEM Number:751712, 8L8Z7827001A, ZZCA73560, ZZCA73560R00.Location:Rear Left Driver Side.This window regulator meets or exceeds OE standards
  • OEM Grade Materials: Designed to meet original equipment standards, this window regulator and window motor assembly uses rust-proof metal and wear-resistant components. It delivers factory-like fit and function without the dealership price tag
  • Plug and Play Installation: No cutting, drilling, or complicated wiring required. This window regulator bolts directly into factory mounting locations and connects to your existing window motor harness for a straightforward DIY replacement
  • Two-Year Free Replacement Coverage: This power window regulator is backed by a full 24-month replacement policy. If your window regulator or window motor ever fails to operate properly, simply reach out to us through Philtop message and we will send you a free replacement unit with no hassle

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20082009 - 20122009 - 20122008 - 20122009 - 201220082009 - 201220082009 - 20122008 - 201220082009 - 20102008 - 201120082009 - 201120082009 - 20112008 - 201120082009 - 20112009 - 20102008 - 2011
MakeFordFordFordFordFordFordFordFordFordFordMazdaMazdaMazdaMazdaMazdaMercuryMercuryMercuryMercuryMercuryMercuryMercury
ModelEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeEscapeTributeTributeTributeTributeTributeMarinerMarinerMarinerMarinerMarinerMarinerMariner
TrimHybridHybridLimitedLimitedLimited HybridXLSXLSXLTXLTXLTHybridHybridSiiBaseBaseBaseHybridHybridPremierPremier
Engine2.3L L42.5L L42.5L L43.0L V62.5L L42.3L L42.5L L42.3L L42.5L L43.0L V62.3L L42.5L L43.0L V62.3L L42.5L L42.3L L42.5L L43.0L V62.3L L42.5L L42.5L L43.0L V6
Note----------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the door position, regulator type, mounting holes, connector and motor configuration.
  • Check the fuse, switch, wiring and connector before replacing the regulator.
  • Inspect the glass channels, guide rails and mounting brackets for damage or excessive resistance.
  • Disconnect the negative battery cable and securely support the window glass.
  • Confirm whether window initialization is required after installation.

Installation Steps

  • Step-1: Remove the door trim panel and carefully peel back the moisture barrier.
  • Step-2: Move the glass to the mounting-access position and disconnect the motor connector.
  • Step-3: Release the glass from the regulator and secure it in the raised position.
  • Step-4: Remove the old regulator and clean the guide channels and mounting area.
  • Step-5: Install the new regulator, hand-start the fasteners and reconnect the glass.
  • Step-6: Tighten the fasteners to specification and reconnect the motor and battery.
  • Step-7: Test the window before reinstalling the moisture barrier and door panel.

After Installation

  • Run the window fully up and down several times.
  • Check for binding, tilting, vibration or abnormal noise.
  • Confirm the glass seals correctly at the fully closed position.
  • Initialize the one-touch and anti-pinch functions when required.
  • Ensure the wiring and cables are not trapped behind the door panel.

Product Video

Product Description

玻璃-1-通用玻璃-通用-带电机2

Reviews

4.7/5

Based on 9 reviews

578%
411%
311%
20%
10%

Customer photos and videos

Customer

02/27/2026

Verified buyer

Looks to be good quality and will fit my application. I did test the window motor with my DC power supply on the bench. It ran both directions smoothly at 12.5 volts and down to 5.1 amps. Slide track comes pre-greased and cable retention blocks look pretty sturdy. Will be installing this evening.

CA

05/22/2026

Verified buyer

I am so thankful to get my window back up and running again. Overall installation process is a little bit of a bear, but that is not because of the product. The door is just a hard area to work in. Once it gets going, it mounted Securely, and it is functioning well. I have a 2010 Ford escape, and this fit perfectly replacing the old one that went out a couple of years back. I had just jammed a piece of wood in the door for a long while, but finally I went ahead and purchased this to make it work properly. It seems to work smoothly. I don’t hear it much from it in terms of screeching or anything like that like some of my other windows have done in the past. Definitely thankful to have it working again.

FAQS

No FAQs have been added for this product yet.