2012-2016 Honda CR-V 2.4L L4 | Rear Left Power Window Regulator w/Motor | 751759 - PHILTOP

2012-2016 Honda CR-V 2.4L L4 | Rear Left Power Window Regulator w/Motor | 751759 - PHILTOP

Powerful Motor

Upgraded Pulley & Cable

Quiet & Smooth Operation

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
32ISPWR5107US

Specifications

Brand
PHILTOP
Type
Power Window Regulator
Mode
Power, With Motor
Motor Included
Yes
Pin Quantity
2
Items Included
1x Rear Left Window Regulator - 751-759
Material
Stainless Steel
Torque
8~11 N·m
Input Voltage
12.5
Quantity
1
Motor Speed
90~115 RPM
Warranty Period
2-Year
Part Number
751759

Highlights

  • Vehicle Fitment: Window regulator and motor assembly compatible with 2012-2016 Honda CR-V. Please MATCH your vehicle on the left top before purchasing
  • OEM Number:72750T0AA01, 751759.Location:Rear Left Driver Side.This window regulator meets or exceeds OE standards
  • Engineered for Performance: This window regulator combines a durable steel cable system with precision gearing for smooth operation every time. The corrosion resistant design ensures years of trouble-free use in daily driving environments
  • Direct Fit Replacement: Engineered to match your vehicle's original specifications, this power window regulator requires zero modifications. Simply remove your old unit, bolt this one in place, and connect the factory wiring harness for immediate function
  • 24-Month Customer Protection: We stand behind every window regulator and window motor we sell. For two full years after your purchase, any defect or malfunction means we will replace it at no cost. Contact our US-based support team anytime and we will make it right

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2012 - 20162012 - 20162012 - 201620162015 - 2016
MakeHondaHondaHondaHondaHonda
ModelCR-VCR-VCR-VCR-VCR-V
TrimEXEX-LLXSETouring
Engine2.4L L42.4L L42.4L L42.4L L42.4L L4
Note-----

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the door position, regulator type, mounting holes, connector and motor configuration.
  • Check the fuse, switch, wiring and connector before replacing the regulator.
  • Inspect the glass channels, guide rails and mounting brackets for damage or excessive resistance.
  • Disconnect the negative battery cable and securely support the window glass.
  • Confirm whether window initialization is required after installation.

Installation Steps

  • Step-1: Remove the door trim panel and carefully peel back the moisture barrier.
  • Step-2: Move the glass to the mounting-access position and disconnect the motor connector.
  • Step-3: Release the glass from the regulator and secure it in the raised position.
  • Step-4: Remove the old regulator and clean the guide channels and mounting area.
  • Step-5: Install the new regulator, hand-start the fasteners and reconnect the glass.
  • Step-6: Tighten the fasteners to specification and reconnect the motor and battery.
  • Step-7: Test the window before reinstalling the moisture barrier and door panel.

After Installation

  • Run the window fully up and down several times.
  • Check for binding, tilting, vibration or abnormal noise.
  • Confirm the glass seals correctly at the fully closed position.
  • Initialize the one-touch and anti-pinch functions when required.
  • Ensure the wiring and cables are not trapped behind the door panel.

Product Video

Product Description

玻璃-1-通用玻璃-通用-带电机2

Reviews

4.8/5

Based on 4 reviews

575%
425%
30%
20%
10%

Brad_AutoParts_12

10/03/2025

Installation was a breeze, seriously. It fit perfectly and worked right out of the box. Much better than dealing with that other brand that was a pain to get in.

Lisa_CivicDriver_685

01/01/2026

Got here super fast, well-packaged too. I had a quick question about it, and customer service was on the ball, super helpful. Fixed my window in no time!

FAQS

No FAQs have been added for this product yet.