2001-2003 Toyota Highlander 2.4L/3.0L | Rear Shock Absorber w/Spring | OE#4854049125/171496 - PHILTOP

2001-2003 Toyota Highlander 2.4L/3.0L | Rear Shock Absorber w/Spring | OE#4854049125/171496 - PHILTOP

Rear

Complete Strut & Coil Spring Assembly

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3813SAA164AUS

Specifications

Brand
PHILTOP
Items Included
1x Rear Right Complete Strut Assembly - 171496 1x Rear Left Complete Strut Assembly - 171497
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Rear
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
OE Number
4854049125,4853049215
Part Number
171496,171497,181497,181496

Highlights

  • Fitment: PHILTOP Rear Struts Fit for Highlander 2001 2002 2003.
  • OE NUMBER: 171496, 171497, 15906, 15905.
  • Tips:For details, please confirm the matching in "confirmed it" to confirm whether the parts are suitable for your vehicle application.If you have any questions about the struts, please feel free to contact us. We will respond to your questions within 24 hours.
  • Bounce Reduction: Damping rods reduce body vibration and bounce by generating resistance through the flow of fluid to absorb or slow down the direct impact of energy.
  • More Stable: A new increase tire grip. By increasing the spring rate factor, the rapid vibration of the wheels is suppressed and the tires are prevented from leaving the road.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2001 - 20032001 - 20032001 - 2003
MakeToyotaToyotaToyota
ModelHighlanderHighlanderHighlander
TrimBaseBaseLimited
Engine2.4L L43.0L V63.0L V6
Note
Replaces Part 181496,181497;Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Replaces Part 181496,181497;Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Replaces Part 181496,181497;Recommended OE Application -Specific Replacement;Rear Left;Rear Right

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

14-1

Reviews

5.0/5

Based on 1 review

5100%
40%
30%
20%
10%

Meagan

04/22/2024

Verified buyer

Install a full set of new shocks on my Malibu. Easy install and helped the truck ride a lot smoother.

FAQS

No FAQs have been added for this product yet.

2001-2003 Toyota Highlander Rear Shock Absorber w/Spring 4854049125 | PHILTOP