2012-2017 Toyota Camry 2.5L/3.5L | Rear Strut Assembly 2-Pack | 172943 - PHILTOP

2012-2017 Toyota Camry 2.5L/3.5L | Rear Strut Assembly 2-Pack | 172943 - PHILTOP

Rear

Complete Strut & Coil Spring Assembly

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2018SAA158DUS

Specifications

Brand
PHILTOP
Items Included
1x Rear Right Complete Strut Assembly - 172942 1x Rear Left Complete Strut Assembly - 172943
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Rear
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
Part Number
172943,172942,SR4258,SR4257

Highlights

  • Fitment: PHILTOP Strut & Coil Spring Assembly Fits Camry 2012-2017.Before purchasing, please make sure that the shock absorber is suitable for your vehicle by using the fit filter.
  • OE NUMBER: 172942, 172943, 1333376R, 1333376L, SR4258, SR4257, SR4265, SR4266, 182942, 182943, 2333376R, 2333376L, LS5494582L, 15026, 15025.
  • Restores Ride Height: Struts Assemblies are precisely calibrated for each application-specific coil spring type to match the original package design. The new shock absorbers restore ride height and support vehicle weight.
  • Easy Installation: Factory testing verifies the quality of the struts, and no modifications are required on any of the struts shock absorber assembly. Shock absorber connections conform to the original OE design, ensuring easy and accurate installation every time.
  • Outstanding Quality: Shock absorbers are designed with oil seals and rugged dust caps to protect against impact, leakage and distortion. High-quality steel construction ensures that each coil spring is precisely calibrated to meet OE specifications for added durability.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2012 - 20172012 - 20172012 - 20142012 - 20172012 - 20172012 - 2017
MakeToyotaToyotaToyotaToyotaToyotaToyota
ModelCamryCamryCamryCamryCamryCamry
TrimHybrid LEHybrid XLELLEXLEXLE
Engine2.5L L42.5L L42.5L L42.5L L42.5L L43.5L V6
Note
Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Recommended OE Application -Specific Replacement;Rear Left;Rear Right
Recommended OE Application -Specific Replacement;Rear Left;Rear Right

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

11

Reviews

5.0/5

Based on 2 reviews

5100%
40%
30%
20%
10%

Raafat

09/20/2026

Verified buyer

Very good

Omar DelacruzOmar Delacruz

10/06/2024

Verified buyer

Rear struts on Toyota Camry fit perfect.

FAQS

No FAQs have been added for this product yet.

2012-2017 Toyota Camry Rear Strut Assembly 172943 | PHILTOP