2007-2012 Mercedes-Benz GL450 4.7L V8 | Rear Shock Absorber w/Spring | SK2868 - PHILTOP

2007-2012 Mercedes-Benz GL450 4.7L V8 | Rear Shock Absorber w/Spring | SK2868 - PHILTOP

Rear

Shock Absorber

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
88ISSAA16F7US

Specifications

Brand
PHILTOP
Items Included
2x Rear Suspension Shock Absorber - SK2868
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Type
Shock Absorber
Quantity
2
Position
Rear
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
Part Number
SK2868

Highlights

  • Fitment: Suspension Struts for Mercedes-Benz GL450 2007 2008 2009 2010 2011 2012, for Mercedes-Benz GL550 2008 2009 2010 2011 2012, for Mercedes-Benz GL350 2010 2011 2012, for Mercedes-Benz GL320 2007 2008 2009,for Mercedes-Benz ML450 2010 2011
  • Reference Number:SK2868*2
  • Vehicle Specific: Check fitment information in the listing for compatibility
  • Save The Labor: Safer and quicker installation with our fully pre-assembled complete struts that are precisely designed. Direct replacement of your old parts with no special tools required
  • Kit Includes:Suspension Strut Spring (single cylinder) 2 pack SK2868*2

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20092007 - 20082010 - 20122007 - 20122008 - 20122010 - 2011
MakeMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-Benz
ModelGL320GL320GL350GL450GL550ML450
TrimBluetec 4MaticCDIBluetec 4MaticBaseBaseHybrid 4Matic
Engine3.0L V63.0L V63.0L V64.7L V85.5L V83.5L V6
Note
w/o Adaptive Suspension
w/o Adaptive Suspension
w/o Adaptive Suspension
w/o Adaptive Suspension
w/o Adaptive Suspension
w/ Air Suspension; w/o Adaptive Suspension

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

12

Reviews

4.6/5

Based on 11 reviews

573%
418%
39%
20%
10%

Jenny

09/21/2025

Verified buyer

Just installed them today and so far ride great and handle very well. Premium part at a very affordable price!

Rommel Narvasa Jr.

03/23/2025

Verified buyer

They took about 4 hours to install but they fit correctly and they're a fantastic they work great

FAQS

No FAQs have been added for this product yet.