Ford Crown Victoria 4.6L | Starter Motor | Replaces 3267N - PHILTOP

Ford Crown Victoria 4.6L | Starter Motor | Replaces 3267N - PHILTOP

Power: 0.8 kW

Pinion Teeth: 10

Quick Starting Response

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2142STR270MUS

Specifications

Brand
PHILTOP
Power
0.8 kW
Pinion Teeth
10
Voltage
12 V
Rotation Direction
CCW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 5726N 1x Manual
Warranty Period
2-Year
OE Number
112826,4-5621,410-21022,50-822462,50-822462-1,5726,822462T1,893890T,MOT3012,SAB0031

Highlights

  • Reference Number:3221,3267,3267N,3C2411000CA,3C24CA,3C2Z11002CA,4R3Z11002CA,6691,6C2T11000CA,6C2TCA,6C2Z11002BA,6C2Z11002CA,6W1T11000AA,6W1Z11002AA,91025857,9C2T10300AA,9C2T11000AA,9C2Z11002A,F2VU11000AC,F2VU11000AD,F2VUAC,F2VUAD,F2VY11002A,F2VY11002ARM,F3LU11000AA,F3LUAA,F3LY11002A,F3LY11002ARM,F4LU11000AA,F4LUAA,F6VU11000AA,F6VUAA,F6VZ11002AA,F75U11000AA,F75U11000AB,F75U11000AC,F75UAA,F75UAB,F75UAC,F75Z11002AA,F7LU11000AA,F7LU11000BA,F7LU11001BA,F7LUAA,F7LUBA,F7LZ11002AA,F7LZ11002BA,F7UU11000AA,F7UU11000AB,F7UUAA,F7UUAB,F7UZ11002AA,F7UZ11002AARM
  • Compatible for: This high torque starter fits for 1992-2011 Grand Marquis, 1992-2011 Town Car, 2004-2013 E-250, 1992-2011 Crown Victoria, 1999-2010 E-350 Super Duty 5.4L, 1997-1998 150 4.6L, 1996-2004 Must-n-g 4.6L, 2004-2006 2008-2013 150e, 2011-2013 E-350 Super Duty, 1997-1998 Expedition, 1997-1998 150 5.4L, 1997-2002 E-250 Econoline 5.4L, 2009-2010 250f Super Duty 5.4L, 1997-2002 E-350 Econoline Club Wagon 5.4L, 1999-2010 E-350 Super Duty 6.8L, 2003-2005 E-350 Club Wagon 5.4L, 1997-2002 150e Econoline 4.6L, 1997-2002 150e Econoline 5.4L, 1994-1997 Thunderbird 4.6L, 2003 2007 150e 4.6L, 1997-2002 E-350 Econoline Club Wagon 6.8L, 2003 E-250 5.4L, 1993-1998 Mark VIII
  • Specification:①KW:1.4, ②Volt:12, ③Tooth Pinion/Teeth:12, ④ROTATION:CW, ⑤Design:PMGR , 2003-2004 Marauder, 1997-2002 150e Econoline Club Wagon 4.6L, 2003 2005 E-350 Club Wagon 6.8L, 2009 350 Super Duty 6.8L, 1997 250f 4.6L, 2009 250f Super Duty 6.8L, 2003 2007 150e 5.4L, 2003 E-250 4.6L, 2002 E-550 Econoline Super Duty 6.8L, 2003-2010 E-450 Super Duty 6.8L, 2003-2004 2006-2010 E-450 Super Duty 5.4L, 2000-2002 E-450 Econoline Super Duty 5.4L, 1997-1999 Econoline Super Duty 6.8L, 2003 E-550 Super Duty 6.8L, 2011-2013 E-450 Super Duty, 2009 F-550 Super Duty 6.8L, 2000-2002 E-450 Econoline Super Duty 6.8L, 1997-1999 Econoline Super Duty 5.4L
  • Premium Starters: Rigorously tested to OE standards with 2000H endurance,96H corrosion resistance test, extreme temperatures from -40°C to 105°C, and harsh vibration impacts. Built for unparalleled reliability, ensuring your Safety and stable power in any condition
  • Efficient Quiet:New Starter with high-quality coils and precision gears enable quick, smooth starts with no noise. Superior conductive materials reduce fuel consumption and prevent short circuits. Install once for lasting performance

Compatible Vehicles

Check if this fits your vehicle

Compatible vehicle data is being verified for this product.

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

starter Replacement forstarter

Reviews

4.4/5

Based on 8 reviews

550%
438%
313%
20%
10%

Emma_DailyCommute_504

10/16/2025

Extremely fast delivery and the part was a perfect match for my vehicle. I appreciated how easy it was to swap out the old unit without any modifications. It's working perfectly and I couldn't be happier with the service.

Mike from Texas_978

02/04/2026

I was worried about using a non-OEM part, but this starter actually feels stronger than the original. My truck starts up much faster now and sounds a lot healthier. It definitely resolved all the starting problems I was having.

FAQS

Yes, easy to install. To ensure safety and correct installation, which varies by vehicle, professional tools are required. Consult our included manual and video guide.

Not necessarily. Keep your existing battery if it tests good and holds a charge.

The engine should crank smoothly without grinding. If the starter keeps running after the engine starts, switch off immediately.