2002-2007 Mitsubishi Lancer 2.0L L4/2.4L L4 | 10 PC Front Lower Control Arm | OE#4013A256/K90247 - PHILTOP

2002-2007 Mitsubishi Lancer 2.0L L4/2.4L L4 | 10 PC Front Lower Control Arm | OE#4013A256/K90247 - PHILTOP

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
55ISOCA2637US

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Control Arm + Ball Joint - Passenger Side - K620345 1x Front Lower Control Arm + Ball Joint - Driver Side - K620384 2x Front Sway Bar End Links - Driver and Passenger Side - K90247 2x Front Inner Tie Rod Ends - Driver and Passenger Side - EV80587 2x Front Outer Tie Rod Ends - Driver and Passenger Side - ES3704 2x Tie Rod Boots + Bellows W/Locking C-Clamps
Quantity
10
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
4013A256,4013A462,MR392730,4056A161,4013A274,4013A273,MR403420,MR403419,MR954887,MR241349,MR491358,4013A404,MR476457,4422A056,4422A078,4013A403
Part Number
K90247,EV80587,ES3704,RK620384,RK620345,TC2631,MK90247,MES3704,MEV80587,TA2851,TC2517,K620345,1026328,GS80122,K80373,CB67074PR,GEV80587,TI67020XL,MSA603,1018131,GK90247,INL614,LS17101,JBJ969,MSH210

Highlights

  • #37,316 in Automotive (See Top 100 in Automotive)
  • #61 in Automotive Replacement Control Arms
  • Fitment: PHILTOP Front Lower Control Arm w/Ball Joint Sway Bar End Link Tie Rod End Boots & Bellows for Mitsubishi Lancer FWD 2002-2007
  • Tips: Please check that the control arm is suitable for your vehicle by "Philtopconfirmedfit" before purchasing
  • OE NUMBER: Front Lower Control Arm w/Ball Joint Sway Bar End Link Tie Rod End Boots & Bellows K620345 K620384 K90247 EV80587 ES3704
  • Heavy Duty Ball Joint: This product adopts high-strength forged alloy steel, and its strength far exceeds the original standard. After hardening, the ball pin has excellent wear resistance and can maintain long-term stability even in the face of extreme road conditions or large tires
  • Simple Installation: Our control arms meet production standards and are dimensionally accurate. This makes installation simple and requires no additional action

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2002 - 20072002 - 20042002 - 20062004 - 2006200620042004
MakeMitsubishiMitsubishiMitsubishiMitsubishiMitsubishiMitsubishiMitsubishi
ModelLancerLancerLancerLancerLancerLancerLancer
TrimESLSOZ RallyRalliartSESportbackSportback Ralliart
Engine2.0L L42.0L L42.0L L42.4L L42.0L L42.4L L42.4L L4
Note-------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.6/5

Based on 9 reviews

567%
422%
311%
20%
10%

Steve_DIYer_402

01/07/2026

This kit was pretty easy to install on my Lancer. Everything lined up well and it feels much better now. A good value compared to other options.

Rob_HomeGarage_871

05/23/2026

These showed up really fast and were packed nicely. Had a question about fitment and the customer service team was super helpful and quick to respond.

FAQS

No FAQs have been added for this product yet.