2006 BMW 325i 3.0L L6 | Tensioner | 39112 - PHILTOP

2006 BMW 325i 3.0L L6 | Tensioner | 39112 - PHILTOP

Quiet Operation

Slip Resistant

Corrosion & Heat-Resistant Housing

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
49ISETB0047US

Specifications

Brand
PHILTOP
Pulley Included
Yes
Belt Included
No
Belt Type
V-Ribbed
Contact Surface
Smooth/Backside
Pulley Outer Diameter
2.76 in
Items Included
1x Engine Timing Belt Tensioner - 39112
Quantity
1
Warranty Period
2-Year
Part Number
39112

Highlights

  • [Fitment]: PHILTOP Belt Tensioner with Pulley Replacement For ① BMW 328i 2012-2013 3.0L, 2007-2011, X3 2007-2010, 325i 2006, X5 2007-2010 3.0L, 128i 2008-2013, 328xi 2007-2008, 528i 2008-2010, Z4 2006-2011 3.0L, 330i 2006, 530i 2006-2007, 525i 2006-2007, 530xi 2006-2007, 325xi 2006, 528xi 2008, 330xi 2006, 525xi 2006-2007
  • [OE Reference Number]: 39112, 88877500, Manufactured using the same or improved technology and quality materials as the original equipment manufacturer (OEM) components to ensure a factory match
  • [Labyrinth Seal Protection]: PHILTOP automatic drive belt tensioner assembly with pulley adopts labyrinth seal to protect internal components, meeting or exceeding the service life requirements of the original manufacturer
  • [Long service life]: The damping system tested hundreds of times absorbs extreme vibration to improve the life of the tensioner as well as belts and accessories
  • [Strong stability]: Torsion round spring design used in PHILTOP tensioner provides reliable and stable tension

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2008 - 2013200620062007 - 20132007 - 2008200620062006 - 20072006 - 20072008 - 201020082006 - 20072006 - 20072007 - 20082009 - 20102007 - 20082009 - 20102006 - 20082006 - 20082006 - 20082009 - 2011
MakeBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMW
Model128i325i325xi328i328xi330i330xi525i525xi528i528xi530i530xiX3X3X5X5Z4Z4Z4Z4
TrimBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBase3.0sixDrive30i3.0sixDrive30iCoupe 3.0siRoadster 3.0iRoadster 3.0sisDrive30i
Engine3.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L6
Note---------------
Alternator, Power Steering and Water Pump;w/o Traction Control
Alternator, Power Steering and Water Pump;w/o Traction Control
----

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the engine application, mounting holes, pulley size, groove count and tensioner-arm direction.
  • Inspect the pulleys for binding, looseness or abnormal bearing noise.
  • Check the tensioner arm for smooth movement, sufficient damping and fluid leakage.
  • Inspect the belt for cracks, glazing, frayed edges, contamination or stretching. Replace an aged or worn belt at the same time.
  • Disconnect the negative battery cable before installation.

Installation Steps

  • Step-1: Photograph or record the belt-routing path before removing the belt.
  • Step-2: Use a suitable breaker bar or long-handled tool to slowly release the tensioner. Do not pry against the tensioner arm.
  • Step-3: Remove the belt and tensioner, then clean the mounting surface.
  • Step-4: Position the new tensioner and tighten its mounting bolts to specification.
  • Step-5: Route the belt according to the recorded path and ensure every rib is fully seated in the pulley grooves.
  • Step-6: Slowly release the tensioner and recheck the complete belt path.

After Installation

  • Confirm the tensioner bolts are secure and the belt is correctly seated.
  • Start the engine and observe the belt tracking and tensioner movement.
  • Check for belt slipping, jumping, lateral movement or abnormal noise.
  • Confirm the alternator and all belt-driven accessories operate normally.

Product Description

1ETB00701

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

Sam Ding

01/11/2026

Verified buyer

I have had a rattling noise in the BMW N52 engine for months, and I couldn't figure out what the issue finally ordered this product, and it fixed the problem

Carl Moore

12/28/2025

Verified buyer

fitment is right, operation is as it should be. so far 4 months down the road no issues and very little jumping, the old one was having a dance party so it needed to be retired.

FAQS

No FAQs have been added for this product yet.