2012-2015 Chevrolet Captiva Sport 2.4L L4 | Tensioner | OE#12605175/39288 - PHILTOP

2012-2015 Chevrolet Captiva Sport 2.4L L4 | Tensioner | OE#12605175/39288 - PHILTOP

Quiet Operation

Slip Resistant

Corrosion & Heat-Resistant Housing

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
90ISETB0717US

Specifications

Brand
PHILTOP
Pulley Included
Yes
Belt Included
No
Belt Type
V-Ribbed
Contact Surface
Smooth/Backside
Pulley Outer Diameter
3.25 in
Items Included
1x Engine Timing Belt Tensioner - 39288
Quantity
1
Warranty Period
2-Year
OE Number
12605175
Part Number
39288

Highlights

  • [Fitment]: PHILTOP Belt Tensioner with Pulley Replacement For ① Chevrolet Captiva Sport 2013-2015, 2012 2.4L, ② Buick Regal 2011, 2012-2013 2.0T, LaCrosse 2010 2.4L, ③ Saab 9-5 2011 2.0T
  • [OE Reference Number]: 12605175, 89695, 39288, 1340584, 19341320, 999883A, 49823, Manufactured using the same or improved technology and quality materials as the original equipment manufacturer (OEM) components to ensure a factory match
  • [Labyrinth Seal Protection]: PHILTOP automatic drive belt tensioner assembly with pulley adopts labyrinth seal to protect internal components, meeting or exceeding the service life requirements of the original manufacturer
  • [Long service life]: The damping system tested hundreds of times absorbs extreme vibration to improve the life of the tensioner as well as belts and accessories
  • [Strong stability]: Torsion round spring design used in PHILTOP tensioner provides reliable and stable tension

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010201120112012 - 20132012 - 20132012 - 20152013 - 20152013 - 20152011
MakeBuickBuickBuickBuickBuickChevroletChevroletChevroletSaab
ModelLaCrosseRegalRegalRegalRegalCaptiva SportCaptiva SportCaptiva Sport9-5
TrimCXCXLCXLGSPremiumLSLTLTZTurbo4
Engine2.4L L42.0L L42.4L L42.0L L42.0L L42.4L L42.4L L42.4L L42.0L L4
Note---------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the engine application, mounting holes, pulley size, groove count and tensioner-arm direction.
  • Inspect the pulleys for binding, looseness or abnormal bearing noise.
  • Check the tensioner arm for smooth movement, sufficient damping and fluid leakage.
  • Inspect the belt for cracks, glazing, frayed edges, contamination or stretching. Replace an aged or worn belt at the same time.
  • Disconnect the negative battery cable before installation.

Installation Steps

  • Step-1: Photograph or record the belt-routing path before removing the belt.
  • Step-2: Use a suitable breaker bar or long-handled tool to slowly release the tensioner. Do not pry against the tensioner arm.
  • Step-3: Remove the belt and tensioner, then clean the mounting surface.
  • Step-4: Position the new tensioner and tighten its mounting bolts to specification.
  • Step-5: Route the belt according to the recorded path and ensure every rib is fully seated in the pulley grooves.
  • Step-6: Slowly release the tensioner and recheck the complete belt path.

After Installation

  • Confirm the tensioner bolts are secure and the belt is correctly seated.
  • Start the engine and observe the belt tracking and tensioner movement.
  • Check for belt slipping, jumping, lateral movement or abnormal noise.
  • Confirm the alternator and all belt-driven accessories operate normally.

Product Description

1ETB07101

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

pamela padron

08/16/2024

Verified buyer

This part was good quality and fit as the site said it would.

SarahDrives_252

03/18/2026

Super easy to install, everything lined up perfectly. Way better than trying to find individual parts. Felt like a pro doing the job with this kit.

FAQS

No FAQs have been added for this product yet.