DIY_Karen_141
02/16/2026
Swapping these out was simple enough. They fit perfectly where the old ones were. Much better than paying a fortune at the dealer.

Quick Ignition Response
High-Grade Insulation
Built to Last
Check if this fits your vehicle
Select a vehicle to check this product.
Check if this fits your vehicle
| Year | 2003 | 2004 - 2008 | 2005 | 2002 - 2005 | 2002 - 2008 | 2005 | 2006 | 2006 | 2005 |
|---|---|---|---|---|---|---|---|---|---|
| Make | Jaguar | Jaguar | Jaguar | Jaguar | Jaguar | Jaguar | Jaguar | Jaguar | Jaguar |
| Model | S-Type | S-Type | S-Type | X-Type | X-Type | X-Type | X-Type | X-Type | X-Type |
| Trim | Base | Base | Sport | Base | Base | Premium | Sport | VDP Edition | Vanden Plas |
| Engine | 3.0L V6 | 3.0L V6 | 3.0L V6 | 2.5L V6 | 3.0L V6 | 3.0L V6 | 3.0L V6 | 3.0L V6 | 3.0L V6 |
| Note | OE No. 1X43-12029-AB | - | - | - | - | - | - | - | - |

Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.
Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.
| Spark Plug Thread | Recommended Torque |
|---|---|
| 18 mm (M18) | 35–40 N·m (25.8–29.5 lb-ft) |
| 14 mm (M14) | 25–30 N·m (18.4–22.1 lb-ft) |
| 12 mm (M12) | 15–20 N·m (11.1–14.8 lb-ft) |
| 10 mm (M10) | 10–12 N·m (7.4–8.9 lb-ft) |
| 8 mm (M8) | 8–10 N·m (5.9–7.4 lb-ft) |
| Tapered Seat – No Gasket | 10–20 N·m (7.4–14.8 lb-ft) |
Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.


4.8/5
Based on 4 reviews
DIY_Karen_141
02/16/2026
Swapping these out was simple enough. They fit perfectly where the old ones were. Much better than paying a fortune at the dealer.
Mike from Texas_356
12/08/2025
Popped these in and my car fired right up. Installation was a breeze, much simpler than I thought it would be. Definitely a good buy.
No FAQs have been added for this product yet.
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
Quick Ignition Response
High-Grade Insulation
Built to Last
Check if this fits your vehicle
Select a vehicle to check this product.
4 reviews
5 star: 3
4 star: 1
Check if this fits your vehicle
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| 2003 | Jaguar | S-Type | Base | 3.0L V6 | OE No. 1X43-12029-AB |
| 2004 - 2008 | Jaguar | S-Type | Base | 3.0L V6 | - |
| 2005 | Jaguar | S-Type | Sport | 3.0L V6 | - |
| 2002 - 2005 | Jaguar | X-Type | Base | 2.5L V6 | - |
| 2002 - 2008 | Jaguar | X-Type | Base | 3.0L V6 | - |
| 2005 | Jaguar | X-Type | Premium | 3.0L V6 | - |
| 2006 | Jaguar | X-Type | Sport | 3.0L V6 | - |
| 2006 | Jaguar | X-Type | VDP Edition | 3.0L V6 | - |
| 2005 | Jaguar | X-Type | Vanden Plas | 3.0L V6 | - |

Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.
Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.
| Spark Plug Thread | Recommended Torque |
|---|---|
| 18 mm (M18) | 35–40 N·m (25.8–29.5 lb-ft) |
| 14 mm (M14) | 25–30 N·m (18.4–22.1 lb-ft) |
| 12 mm (M12) | 15–20 N·m (11.1–14.8 lb-ft) |
| 10 mm (M10) | 10–12 N·m (7.4–8.9 lb-ft) |
| 8 mm (M8) | 8–10 N·m (5.9–7.4 lb-ft) |
| Tapered Seat – No Gasket | 10–20 N·m (7.4–14.8 lb-ft) |
Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.


4.8/5
Based on 4 reviews
DIY_Karen_141
Feb 16,2026
Swapping these out was simple enough. They fit perfectly where the old ones were. Much better than paying a fortune at the dealer.
Mike from Texas_356
Dec 08,2025
Popped these in and my car fired right up. Installation was a breeze, much simpler than I thought it would be. Definitely a good buy.
No FAQs have been added for this product yet.