2005-2009 Subaru Outback 2.5L H4 | 1 PC Ignition Coil | OE#22433AA50A/UF538 - PHILTOP

2005-2009 Subaru Outback 2.5L H4 | 1 PC Ignition Coil | OE#22433AA50A/UF538 - PHILTOP

Quick Ignition Response

High-Grade Insulation

Built to Last

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4986IGC3722US

Specifications

Brand
PHILTOP
Items Included
1x Ignition Coil - UF538
Type
Block-Type
Quantity
1
Color
Black
Pin Count
4
Warranty Period
2-Year
OE Number
22433AA50A,22433AA58A,32011356,32005954,22433AA580,22433AA500
Part Number
UF538,GN10405,C707,E1038,48744,U2082,2IGC0376,UF538T,C1709,48981,5C1766,U5062,E1066,E1039,50128,IC618,CUF538,C1710,IC618SB,5126,CLS1127,1813913,230531,CJ26,MPSMF538,185803,COP310,3312457019830613,1415162,8415162,E1037,E1038P,E1066P

Highlights

  • [Vehicle Fitment]: Compatible with [Chrysler] 2005-2023 300 5.7/6.1/6.4L 2007-2009 Aspen 5.7L [Dodge] 2006-2023 Charger 5.7/6.1/6.2/6.4L 2006-2010 Ram 1500/2500 5.7L 2008-2023 Challenger 5.7/6.1/6.2/6.4L 2011-2023 Durango 5.7/6.4L 2006-2009 Durango/Ram 3500 5.7L 2006-2008 Magnum 5.7/6.1L
  • [OEM Coil Packs Design]: Meets strict OE specifications for precise fit and performance, matching or exceeding the original factory part. Reference Number: Extends OE manufacturer part number
  • [High-Quality Ignition Coils]: OEM replacement ignition coil | Ignites within 0.1–0.2 seconds | Resists corrosion at up to 140 °C | Provides RF interference protection | Offers a lifespan of 6500+ miles | Delivers high voltage output | Ensures smooth engine operation.
  • [Easy Installation]: Rigorous testing ensures maximum durability. Backed by 166+ years of expertise for simple, safe installation and reliable performance.
  • [Warm Tips]: Please enter your vehicle’s year, make, and model to verify fitment before purchasing.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2006200520082005 - 20082006 - 2008200520052006 - 201020102005 - 201020052006 - 20092007 - 20092007 - 2009200520052006 - 2009200720082006 - 200920082009200820052005
MakeSaabSaabSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaru
Model9-2X9-2XForesterForesterForesterForesterForesterImprezaImprezaImprezaImprezaLegacyLegacyLegacyLegacyLegacyOutbackOutbackOutbackOutbackOutbackOutbackOutbackOutbackOutback
Trim2.5iLinearSports 2.5 XXX L.L. Bean EditionXSXS L.L. Bean Edition2.5i2.5i PremiumOutback SportRS2.5i2.5i Limited2.5i Special EditionLimitedi2.5i2.5i Basic2.5i L.L. Bean Edition2.5i Limited2.5i Limited L.L. Bean Edition2.5i Special EditionBaseLimitedi
Engine2.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H4
Note
Alternate Number
Alternate Number
------------
w/ Federal Emissions
w/ Federal Emissions
-------
w/ Federal Emissions
w/ Federal Emissions

How to Install?

Installation Manual Download

User manual (PDF)
Download

Related Diagnostic Codes

  • P0300-Random/multiple-cylinder misfire — inspect the spark plugs, ignition coils, wiring and fuel system.
  • P0301–P0306-Specific-cylinder misfire — inspect the plug, coil and wiring for the indicated cylinder.
  • P0350-Ignition-coil primary/secondary circuit fault — check coil resistance, connectors and wiring.
  • P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.

Checks Before Installation

  • Confirm the ignition coils and spark plugs match the vehicle and original parts.
  • Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
  • Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
  • Check the spark-plug wells for oil, carbon deposits or debris.
  • Allow the engine to cool completely before removing the spark plugs.
  • Confirm the specified spark-plug gap and installation torque in the vehicle service manual.

Installation Steps

  • Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
  • Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
  • Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
  • Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
    Gasket seat and tapered seat spark plugs compared

    Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.

    Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.

  • Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.

Spark Plug Torque Reference

Spark Plug ThreadRecommended Torque
18 mm (M18)35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket10–20 N·m (7.4–14.8 lb-ft)

Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.

After Installation

  • Clear historical fault codes with an OBD-II scanner.
  • Start the engine and let it idle for several minutes.
  • Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
  • Check that the malfunction indicator light remains off.
  • Perform a short road test, then rescan for returned fault codes.

Product Video

Product Description

11

Reviews

4.7/5

Based on 10 reviews

570%
430%
30%
20%
10%

Larissa

10/14/2026

Verified buyer

I ordered this Ignition Coil 2 years ago and it's still going strong with no issues at all. I recommend it 100 percent.

Ashley_RoadTrip_846

12/07/2025

These coil packs feel really robust and were a great value. My truck's engine is purring like a kitten now. Definitely a good buy.

FAQS

Fitment depends on your engine size and year. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.

We stand behind the quality of our ignition systems with a 3-Year Limited Warranty. Scroll to the "Warranty & Support" section at the bottom of the page for full details on our 3-year reliability guarantee.

Yes, these are common symptoms of a failing coil (Code P0300-P0308). Review the "Product Highlights" section to see how our high-voltage output restores smooth engine performance.