touch penspens
Verified Purchaser
42023-11-05The heat shields were a little hard to make fit. Had to reshape them a little to get them on. Once on, the muffler worked. I'm 2 1/2 month in with the muffler and engine light has stayed off. I would recommend it.
touch penspens
Verified Purchaser
42023-11-05The heat shields were a little hard to make fit. Had to reshape them a little to get them on. Once on, the muffler worked. I'm 2 1/2 month in with the muffler and engine light has stayed off. I would recommend it.
touch penspens
Verified Purchaser
42023-11-05The heat shields were a little hard to make fit. Had to reshape them a little to get them on. Once on, the muffler worked. I'm 2 1/2 month in with the muffler and engine light has stayed off. I would recommend it.
Sergio
Verified Purchaser
42023-11-04Easy to install took about 2 hours to remove old cross pipe and install new one couple of studs came out of the head no bid deal just make sure no aluminum is on the threads the studs for the mid pipe come with a squared end making it easy to install without a stud extractor tool. Now i will wait and see how long this replacement will last. You will need to replace your o2 sensors if you damage them otherwise you can reuse the ones from your old one.Installation:4/5Quality:3.5/5
Sergio
Verified Purchaser
42023-11-04Easy to install took about 2 hours to remove old cross pipe and install new one couple of studs came out of the head no bid deal just make sure no aluminum is on the threads the studs for the mid pipe come with a squared end making it easy to install without a stud extractor tool. Now i will wait and see how long this replacement will last. You will need to replace your o2 sensors if you damage them otherwise you can reuse the ones from your old one.Installation:4/5Quality:3.5/5
Sergio
Verified Purchaser
42023-11-04Easy to install took about 2 hours to remove old cross pipe and install new one couple of studs came out of the head no bid deal just make sure no aluminum is on the threads the studs for the mid pipe come with a squared end making it easy to install without a stud extractor tool. Now i will wait and see how long this replacement will last. You will need to replace your o2 sensors if you damage them otherwise you can reuse the ones from your old one.Installation:4/5Quality:3.5/5
Sergio
Verified Purchaser
42023-11-04Easy to install took about 2 hours to remove old cross pipe and install new one couple of studs came out of the head no bid deal just make sure no aluminum is on the threads the studs for the mid pipe come with a squared end making it easy to install without a stud extractor tool. Now i will wait and see how long this replacement will last. You will need to replace your o2 sensors if you damage them otherwise you can reuse the ones from your old one.Installation:4/5Quality:3.5/5
Sergio
Verified Purchaser
42023-11-04Easy to install took about 2 hours to remove old cross pipe and install new one couple of studs came out of the head no bid deal just make sure no aluminum is on the threads the studs for the mid pipe come with a squared end making it easy to install without a stud extractor tool. Now i will wait and see how long this replacement will last. You will need to replace your o2 sensors if you damage them otherwise you can reuse the ones from your old one.Installation:4/5Quality:3.5/5
Sergio
Verified Purchaser
42023-11-04Easy to install took about 2 hours to remove old cross pipe and install new one couple of studs came out of the head no bid deal just make sure no aluminum is on the threads the studs for the mid pipe come with a squared end making it easy to install without a stud extractor tool. Now i will wait and see how long this replacement will last. You will need to replace your o2 sensors if you damage them otherwise you can reuse the ones from your old one.Installation:4/5Quality:3.5/5
Sergio
Verified Purchaser
42023-11-04Easy to install took about 2 hours to remove old cross pipe and install new one couple of studs came out of the head no bid deal just make sure no aluminum is on the threads the studs for the mid pipe come with a squared end making it easy to install without a stud extractor tool. Now i will wait and see how long this replacement will last. You will need to replace your o2 sensors if you damage them otherwise you can reuse the ones from your old one.Installation:4/5Quality:3.5/5
touch penspens
Verified Purchaser
42023-11-05The heat shields were a little hard to make fit. Had to reshape them a little to get them on. Once on, the muffler worked. I'm 2 1/2 month in with the muffler and engine light has stayed off. I would recommend it.
touch penspens
Verified Purchaser
42023-11-05The heat shields were a little hard to make fit. Had to reshape them a little to get them on. Once on, the muffler worked. I'm 2 1/2 month in with the muffler and engine light has stayed off. I would recommend it.
touch penspens
Verified Purchaser
42023-11-05The heat shields were a little hard to make fit. Had to reshape them a little to get them on. Once on, the muffler worked. I'm 2 1/2 month in with the muffler and engine light has stayed off. I would recommend it.
Sergio
Verified Purchaser
42023-11-04Easy to install took about 2 hours to remove old cross pipe and install new one couple of studs came out of the head no bid deal just make sure no aluminum is on the threads the studs for the mid pipe come with a squared end making it easy to install without a stud extractor tool. Now i will wait and see how long this replacement will last. You will need to replace your o2 sensors if you damage them otherwise you can reuse the ones from your old one.Installation:4/5Quality:3.5/5
Sergio
Verified Purchaser
42023-11-04Easy to install took about 2 hours to remove old cross pipe and install new one couple of studs came out of the head no bid deal just make sure no aluminum is on the threads the studs for the mid pipe come with a squared end making it easy to install without a stud extractor tool. Now i will wait and see how long this replacement will last. You will need to replace your o2 sensors if you damage them otherwise you can reuse the ones from your old one.Installation:4/5Quality:3.5/5
Sergio
Verified Purchaser
42023-11-04Easy to install took about 2 hours to remove old cross pipe and install new one couple of studs came out of the head no bid deal just make sure no aluminum is on the threads the studs for the mid pipe come with a squared end making it easy to install without a stud extractor tool. Now i will wait and see how long this replacement will last. You will need to replace your o2 sensors if you damage them otherwise you can reuse the ones from your old one.Installation:4/5Quality:3.5/5
Sergio
Verified Purchaser
42023-11-04Easy to install took about 2 hours to remove old cross pipe and install new one couple of studs came out of the head no bid deal just make sure no aluminum is on the threads the studs for the mid pipe come with a squared end making it easy to install without a stud extractor tool. Now i will wait and see how long this replacement will last. You will need to replace your o2 sensors if you damage them otherwise you can reuse the ones from your old one.Installation:4/5Quality:3.5/5
Sergio
Verified Purchaser
42023-11-04Easy to install took about 2 hours to remove old cross pipe and install new one couple of studs came out of the head no bid deal just make sure no aluminum is on the threads the studs for the mid pipe come with a squared end making it easy to install without a stud extractor tool. Now i will wait and see how long this replacement will last. You will need to replace your o2 sensors if you damage them otherwise you can reuse the ones from your old one.Installation:4/5Quality:3.5/5
Sergio
Verified Purchaser
42023-11-04Easy to install took about 2 hours to remove old cross pipe and install new one couple of studs came out of the head no bid deal just make sure no aluminum is on the threads the studs for the mid pipe come with a squared end making it easy to install without a stud extractor tool. Now i will wait and see how long this replacement will last. You will need to replace your o2 sensors if you damage them otherwise you can reuse the ones from your old one.Installation:4/5Quality:3.5/5
Sergio
Verified Purchaser
42023-11-04Easy to install took about 2 hours to remove old cross pipe and install new one couple of studs came out of the head no bid deal just make sure no aluminum is on the threads the studs for the mid pipe come with a squared end making it easy to install without a stud extractor tool. Now i will wait and see how long this replacement will last. You will need to replace your o2 sensors if you damage them otherwise you can reuse the ones from your old one.Installation:4/5Quality:3.5/5
