22026-02-10

They fit in pretty good on my 2014 Silverado, but be aware, the clamps they send are not worthy whatsoever. I’ve adjusted the clamp 20 times and still have a really bad exhaust leak, i’m having to have it welded. Before installing not a single problem with my truck, now after install, i have to replace the O2 sensors because first crank, the check engine light is on. overall it’s good i guess for the price, but it’s going to come with issues.

22025-06-23

I’m not sure what happened but one of these had the wrong flashing on the end of it and it did not fit our 2012 Honda odyssey. So be sure to check that before you start putting these on!

22026-03-12

After two weeks of having them on my 08 Silverado the drivers side started rattling again… not sure if I got a bad one or if there all bad but do yourself a favor and spend the extra money..

22026-08-12

FIt my Subaru but the check engine light is still on for catalytic converter. It fit I had to adject the angle a little but I think it was because my exhaust pipes are a bit rusty. Just a side note it doesnt make your car sound different kind of like a speaker inside a aluminum can.

22024-10-26

Well the passenger side catalytic converter mounted and sealed to the manifold and muffler perfectly, but all that did was set me up for the utter headache that followed with the resonator and drivers side catalytic convertor. After connecting the resonator to the passenger side cat i started realizing some things might be off as only one of the two exhaust hangers reached its anchor point. So pipe angle is definitely off. Next was the drivers side catalytic converter after bolting it down as far as it would go, there was still a massive gap between the top of the catalytic converter pipe and the exhaust manifold i can literally put my finger completely through the gap, which is ridiculous, but then trying to get that catalytic converter to line up with other end of the resonator was a nightmare. Either way I'm still not even sure if my catalytic convertor actually work yet as I will have to Frankenstein this system in order to get it to work. Hopefully they do, because I don't need anymore migraines from this. Read more

22024-10-26

Well the passenger side catalytic converter mounted and sealed to the manifold and muffler perfectly, but all that did was set me up for the utter headache that followed with the resonator and drivers side catalytic convertor. After connecting the resonator to the passenger side cat i started realizing some things might be off as only one of the two exhaust hangers reached its anchor point. So pipe angle is definitely off. Next was the drivers side catalytic converter after bolting it down as far as it would go, there was still a massive gap between the top of the catalytic converter pipe and the exhaust manifold i can literally put my finger completely through the gap, which is ridiculous, but then trying to get that catalytic converter to line up with other end of the resonator was a nightmare. Either way I'm still not even sure if my catalytic convertor actually work yet as I will have to Frankenstein this system in order to get it to work. Hopefully they do, because I don't need anymore migraines from this. Read more