42026-08-13

I installed the PHILTOP Catalytic Converter Kit on my 1998 Avalon, and I have to say, it was a solid fit. The installation process was straightforward, and I appreciated the direct-fit design that made it easy to replace my old, defective converter. Since the installation,

42026-04-12

This PHILTOP catalytic converter kit is a practical option if you’re dealing with a check engine light or emissions issues on Subaru 2.5L models. It’s designed as a direct-fit replacement for vehicles like Forester, Outback, Impreza, and Legacy, so installation is generally straightforward without major modifications . Being EPA-compliant means it meets federal emissions standards (though it may not be legal in CARB states like California), which is important to check before buying. The construction is typically stainless steel with a ceramic substrate, built to handle heat and exhaust flow while helping reduce emissions and improve engine efficiency . Performance-wise, it does a good job for daily driving and restoring normal operation, though it’s not as long-lasting as premium OEM or high-end brands. Overall, it’s a cost-effective solution that works well if you need a reliable replacement without spending a lot.

42026-03-14

The PHILTOP High Flow Catalytic Converter offers a direct fit for Honda CR-V models from 2002 to 2006, compatible with OE part numbers 16167, 16462, 642288, and 40402. This EPA compliant converter kit is expertly designed to enhance the performance of your vehicle while reducing emission

42026-03-04

The PHILTOP High Flow Catalytic Converter for the Honda CR-V 2.4L is a top-notch product that is sure to impress. This direct-fit catalytic converter kit, which is EPA compliant and compatible with models from 2002 to 2006, is designed with precision and quality in mind.

42026-03-01

The PHILTOP High Flow Catalytic Converter is a top-notch choice for Honda CR-V owners seeking superior performance and compliance. This direct-fit converter kit is designed to seamlessly integrate into 2002-2006 models, guaranteeing a perfect match

42025-11-13

The alignment with the exhaust system was spot-on — no modifications or special tools needed. The installation took less than two hours, and once I started the car, it ran smoother and quieter than it had in years.The check engine light went off after a short drive, and I could immediately tell the emissions were cleaner. The quality of the welds and the materials feel solid, just like OEM parts.

42025-08-22

Came nicely shipped no damage and a day earlier. Looked and worked correctly. Did come with bolts but they didn’t seem to fit in like they should have. Very nice for the price

42025-02-02

Our 2003 CR-V at 250K miles has been throwing P0420 codes intermittently for about a year. P0420 indicates catalytic convertor is not operating efficiently; in our case, it's 22 years old and has a quarter million miles, so it's just tired.This convertor is a bit smaller diameter than the OEM convertor but has a similar heft. The inclusion of new hardware and gaskets is a nice touch as there's no way that crusty, heat cycled fasteners can be effectively reused.Installation was relatively quick (five bolts and an O2 sensor) and took about an hour of leisurely wrenching on ramps. Fit was accurate and did not require bending, bashing, or fabbing. There was more than enough slack in the exhaust hangers to make up the 1/16 to 1/8" difference. Since it's a bolt in unit, it may not be the answer if thieves cut out your catalytic converter beyond the flanges.I've cleared the codes and have noticed no leaks, unusual smells, nor degradation of performance. The P0420 has not popped again, indicating that it's doing its job. For under $100, this is a very quick way of replacing an end-of-life cat to make a vehicle sellable or pass OBD2 scan emissions if your area requires them.Good value.

42026-07-09

Build quality is good, nice welds!

42026-04-12

This PHILTOP catalytic converter kit is a practical option if you’re dealing with a check engine light or emissions issues on Subaru 2.5L models. It’s designed as a direct-fit replacement for vehicles like Forester, Outback, Impreza, and Legacy, so installation is generally straightforward without major modifications . Being EPA-compliant means it meets federal emissions standards (though it may not be legal in CARB states like California), which is important to check before buying. The construction is typically stainless steel with a ceramic substrate, built to handle heat and exhaust flow while helping reduce emissions and improve engine efficiency . Performance-wise, it does a good job for daily driving and restoring normal operation, though it’s not as long-lasting as premium OEM or high-end brands. Overall, it’s a cost-effective solution that works well if you need a reliable replacement without spending a lot.