42026-04-12

This PHILTOP catalytic converter kit is a practical option if you’re dealing with a check engine light or emissions issues on Subaru 2.5L models. It’s designed as a direct-fit replacement for vehicles like Forester, Outback, Impreza, and Legacy, so installation is generally straightforward without major modifications . Being EPA-compliant means it meets federal emissions standards (though it may not be legal in CARB states like California), which is important to check before buying. The construction is typically stainless steel with a ceramic substrate, built to handle heat and exhaust flow while helping reduce emissions and improve engine efficiency . Performance-wise, it does a good job for daily driving and restoring normal operation, though it’s not as long-lasting as premium OEM or high-end brands. Overall, it’s a cost-effective solution that works well if you need a reliable replacement without spending a lot.

42026-01-29

The media could not be loaded. Great fitment. Cat’s allign almost perfectly minus a slight adjustment to the crossbar that goes from one Cat to the other on our 2012 Infiniti M37. The only downfall is we have an exhaust leak now coming from the converters out to the pipes. The nuts won’t get tight enough to secure the leak. One stud broke off leaving me no choice but to go to the muffler shop. Hope they can get these torqued enough to stop the leak.

42025-12-11

Functionally the catalytic converter fit and fixed the P0420 code. The flanges on the exhaust were good and lined up perfectly. The only problem here is the heat shield brackets. I was unable to get them all to line up, but was able to use 1 in front and 1 on back and the other tabs now just function as anti rotation tabs. Is it perfect? No, but it works to fix the problem on my car for an affordable price.Had everything been lined up this probably this would have taken under an hour but ended up taking an extra 30-40 min to try to get the heat shield to fit. Had I not had a lift it would have been really frustrating.The quality of the converter is good. Not OEM, but the welds are good and the exhaust flanges are thick and quality to allow for good sealing. The provided seal had to be pressed into the machined ring.Even with the issues, I would purchase this and use over paying significantly more for an OEM one that has zero issue.

42023-12-12

This product bolted right up to manifold. Did not to change anything

42026-08-13

I recently replaced the catalytic converter in my 1998 Avalon with the PHILTOP Catalytic Converter Kit, and I've been quite pleased with the outcome. The installation was straightforward and fit like a glove, which made the whole process much simpler than I anticipated. After getting it installed, I noticed an immediate improvement in my car's performance and emissions.

42026-08-13

I installed the PHILTOP Catalytic Converter Kit on my 1998 Avalon, and I have to say, it was a solid fit. The installation process was straightforward, and I appreciated the direct-fit design that made it easy to replace my old, defective converter. Since the installation,

42026-07-09

Build quality is good, nice welds!

42026-04-12

This PHILTOP catalytic converter kit is a practical option if you’re dealing with a check engine light or emissions issues on Subaru 2.5L models. It’s designed as a direct-fit replacement for vehicles like Forester, Outback, Impreza, and Legacy, so installation is generally straightforward without major modifications . Being EPA-compliant means it meets federal emissions standards (though it may not be legal in CARB states like California), which is important to check before buying. The construction is typically stainless steel with a ceramic substrate, built to handle heat and exhaust flow while helping reduce emissions and improve engine efficiency . Performance-wise, it does a good job for daily driving and restoring normal operation, though it’s not as long-lasting as premium OEM or high-end brands. Overall, it’s a cost-effective solution that works well if you need a reliable replacement without spending a lot.

42025-12-11

Functionally the catalytic converter fit and fixed the P0420 code. The flanges on the exhaust were good and lined up perfectly. The only problem here is the heat shield brackets. I was unable to get them all to line up, but was able to use 1 in front and 1 on back and the other tabs now just function as anti rotation tabs. Is it perfect? No, but it works to fix the problem on my car for an affordable price.Had everything been lined up this probably this would have taken under an hour but ended up taking an extra 30-40 min to try to get the heat shield to fit. Had I not had a lift it would have been really frustrating.The quality of the converter is good. Not OEM, but the welds are good and the exhaust flanges are thick and quality to allow for good sealing. The provided seal had to be pressed into the machined ring.Even with the issues, I would purchase this and use over paying significantly more for an OEM one that has zero issue.

42025-05-09

Calza perfecto, con excepción del protector termico que los tornillos no coinciden con la medida original. Se le tubo que cambiar a 10" y modificar la posición de las bases