12025-10-26

Did not fit my 2012 nissan xterra pro-4x without modification. The exit flange angle was off, so I had a severe exhaust leak. I had to cut a notch in the exit pipe and weld it to get the proper angle. Super cheap and soft hardware that snapped when I removed it.

12024-10-15

Este producto es una estafa con apenas 10 mil millas de recorrido desde que lo instalaron se daño y causo daños a mi motor y daño tambien los otros componentes de escape . No lo recomiendo es tirar el dinero a la basura no le doy menos estrellas porque no lo permite Read more

12024-01-21

Bought 1 to replace the original. Did a tune up new plugs and coil packs oil and filter change air filter and took it to a certified tech to make sure I didn't need anything else. This cat lasted 3 months to the day.

12026-04-15

Does not fit 2016 F150 5.0 truck - Pipe overall length was 4" longer than stock pipe, pipe diameter was 1/4" larger than stock, flange that bolts to the exhaust manifold was way too big. Maybe the pipe I received was for an F250 or 350 pickup. No way to tell what pipe I received as there was no sticker with the part number on the pipe (like most exhaust pipes have) or no other way to identify it. Oxygen sensor bungs were in the correct locations, so that is about all that was right with the pipe.

12025-12-16

2 inch to long

12026-06-12

This did not fit well.I trimmed the pipes to try and get it to fit.I thought I had finally gotten it to work but it hits my front drive shaft over bumps.It either hits the drive the drive shaft or the right upper control arm. No mater what I do it hits something.Removed and sending it back here shortly.

12026-08-10

Thought I’d try this out. Do not buy this part. Purchased for a Jeep patriot. Would not clear P420 code. Lesson learned, you get what you pay for. Find a reputable brand. Everything else went smoothly just not enough precious metals to make it work correctly.

12026-01-14

Does not come with O 2 sensor port like the description say it does

12026-08-06

Bought it for my Lexus ES300. The pipe wasn't bent right and it was short to short on one end. Wound up just cutting the cat pipe down and welding it on to my original system

12025-12-25

Lo trataré de devolver pues, al instalarlo echo mucho humo y mucho mal olor y la computadora del carro lo detecta como insuficiente.