22026-03-12

After two weeks of having them on my 08 Silverado the drivers side started rattling again… not sure if I got a bad one or if there all bad but do yourself a favor and spend the extra money..

22026-08-12

FIt my Subaru but the check engine light is still on for catalytic converter. It fit I had to adject the angle a little but I think it was because my exhaust pipes are a bit rusty. Just a side note it doesnt make your car sound different kind of like a speaker inside a aluminum can.

22024-10-26

Well the passenger side catalytic converter mounted and sealed to the manifold and muffler perfectly, but all that did was set me up for the utter headache that followed with the resonator and drivers side catalytic convertor. After connecting the resonator to the passenger side cat i started realizing some things might be off as only one of the two exhaust hangers reached its anchor point. So pipe angle is definitely off. Next was the drivers side catalytic converter after bolting it down as far as it would go, there was still a massive gap between the top of the catalytic converter pipe and the exhaust manifold i can literally put my finger completely through the gap, which is ridiculous, but then trying to get that catalytic converter to line up with other end of the resonator was a nightmare. Either way I'm still not even sure if my catalytic convertor actually work yet as I will have to Frankenstein this system in order to get it to work. Hopefully they do, because I don't need anymore migraines from this. Read more

22024-10-26

Well the passenger side catalytic converter mounted and sealed to the manifold and muffler perfectly, but all that did was set me up for the utter headache that followed with the resonator and drivers side catalytic convertor. After connecting the resonator to the passenger side cat i started realizing some things might be off as only one of the two exhaust hangers reached its anchor point. So pipe angle is definitely off. Next was the drivers side catalytic converter after bolting it down as far as it would go, there was still a massive gap between the top of the catalytic converter pipe and the exhaust manifold i can literally put my finger completely through the gap, which is ridiculous, but then trying to get that catalytic converter to line up with other end of the resonator was a nightmare. Either way I'm still not even sure if my catalytic convertor actually work yet as I will have to Frankenstein this system in order to get it to work. Hopefully they do, because I don't need anymore migraines from this. Read more

12025-12-16

2 inch to long

12025-12-25

Lo trataré de devolver pues, al instalarlo echo mucho humo y mucho mal olor y la computadora del carro lo detecta como insuficiente.

12025-09-13

Does not fit 2006 Infiniti G35x sedan.

12026-08-17

Even title says "Toyota Highlander 2.4L 2006", it does not fit in my 2006 Highlander 2.4L. From 4 hole to 1 single outgoing pipe, 1 single outgoing pipe is too short, almost 3/4 inch, to connect to exhaust long pipe line.As you can see at the picture, upper is original and bottom is PHILTOP. Curve neck is bit short to compare with original.Don't buy this for your 2006 Highlander 2.4L

12026-05-20

Did not work. Trigger catalytic below threshold code. Weight was also significant less than factory converter2014 Chevy Cruze 1.4

12026-09-01

there's loose debris visible inside the exhaust runner. looks like metallic spatter or welding slag left over from the manufacturing proces