22026-03-12

After two weeks of having them on my 08 Silverado the drivers side started rattling again… not sure if I got a bad one or if there all bad but do yourself a favor and spend the extra money..

22026-08-12

FIt my Subaru but the check engine light is still on for catalytic converter. It fit I had to adject the angle a little but I think it was because my exhaust pipes are a bit rusty. Just a side note it doesnt make your car sound different kind of like a speaker inside a aluminum can.

22024-10-26

Well the passenger side catalytic converter mounted and sealed to the manifold and muffler perfectly, but all that did was set me up for the utter headache that followed with the resonator and drivers side catalytic convertor. After connecting the resonator to the passenger side cat i started realizing some things might be off as only one of the two exhaust hangers reached its anchor point. So pipe angle is definitely off. Next was the drivers side catalytic converter after bolting it down as far as it would go, there was still a massive gap between the top of the catalytic converter pipe and the exhaust manifold i can literally put my finger completely through the gap, which is ridiculous, but then trying to get that catalytic converter to line up with other end of the resonator was a nightmare. Either way I'm still not even sure if my catalytic convertor actually work yet as I will have to Frankenstein this system in order to get it to work. Hopefully they do, because I don't need anymore migraines from this. Read more

22024-10-26

Well the passenger side catalytic converter mounted and sealed to the manifold and muffler perfectly, but all that did was set me up for the utter headache that followed with the resonator and drivers side catalytic convertor. After connecting the resonator to the passenger side cat i started realizing some things might be off as only one of the two exhaust hangers reached its anchor point. So pipe angle is definitely off. Next was the drivers side catalytic converter after bolting it down as far as it would go, there was still a massive gap between the top of the catalytic converter pipe and the exhaust manifold i can literally put my finger completely through the gap, which is ridiculous, but then trying to get that catalytic converter to line up with other end of the resonator was a nightmare. Either way I'm still not even sure if my catalytic convertor actually work yet as I will have to Frankenstein this system in order to get it to work. Hopefully they do, because I don't need anymore migraines from this. Read more

12025-08-12

Didn’t work for my vehicle

12025-10-26

Did not fit my 2012 nissan xterra pro-4x without modification. The exit flange angle was off, so I had a severe exhaust leak. I had to cut a notch in the exit pipe and weld it to get the proper angle. Super cheap and soft hardware that snapped when I removed it.

12024-10-15

Este producto es una estafa con apenas 10 mil millas de recorrido desde que lo instalaron se daño y causo daños a mi motor y daño tambien los otros componentes de escape . No lo recomiendo es tirar el dinero a la basura no le doy menos estrellas porque no lo permite Read more

12024-01-21

Bought 1 to replace the original. Did a tune up new plugs and coil packs oil and filter change air filter and took it to a certified tech to make sure I didn't need anything else. This cat lasted 3 months to the day.

12026-04-15

Does not fit 2016 F150 5.0 truck - Pipe overall length was 4" longer than stock pipe, pipe diameter was 1/4" larger than stock, flange that bolts to the exhaust manifold was way too big. Maybe the pipe I received was for an F250 or 350 pickup. No way to tell what pipe I received as there was no sticker with the part number on the pipe (like most exhaust pipes have) or no other way to identify it. Oxygen sensor bungs were in the correct locations, so that is about all that was right with the pipe.

12025-12-16

2 inch to long