Good fitment for my Mercedes
Customer Reviews
Read product reviews from across PHILTOP.
4.7/5
Based on 60,972 reviews
Customer photos and videos
All product reviews
60,972 reviews
Works perfect, ford edge, too much work
Great starter!
Works great. Turns motor faster than oem
It's pretty easy to install if you know what you're doing
I got this to replace the motor in our car door. We have a 2002 LeSabre. With age and the summer heat apparently was causing the old motor to slip. It would make ratcheting sounds to the point you have to push the window down or pull it up to make it work. This was a fairly straightforward process to replace the old one. The old one was apparently replaced in the past anyway. After installing this, the window moves a lot faster than the old one before the noise. We are really happy with this. I would recommend to pick up one of these replacement window motors if you’re having your window slow down or even make chatter noises.
Perfect fit on 2017 XT5 FWD model.
Perfect fit and went in without a snag! Exactly like the Toyota original. NO LEAKS, which is one reason I chose this one. I installed it myself using mostly a No. 10 socket, and I did the entire job for $75.The last time I paid a mechanic to replace a similar radiator it cost me $500.
works faster than original
I got this to replace the motor in our car door. We have a 2002 LeSabre. With age and the summer heat apparently was causing the old motor to slip. It would make ratcheting sounds to the point you have to push the window down or pull it up to make it work. This was a fairly straightforward process to replace the old one. The old one was apparently replaced in the past anyway. After installing this, the window moves a lot faster than the old one before the noise. We are really happy with this. I would recommend to pick up one of these replacement window motors if you’re having your window slow down or even make chatter noises.
Restore dependable starting performance with the PHILTOP 17886N replacement starter motor, designed for compatible 2003–2006 Acura RSX 2.0L applications. This 12-volt, 1.2kW starter is built to replace common OE and interchange part numbers including 31200-PRB-A01, 31200-PRB-A11, 17886N, DSDH9, and DSDHL.The starter features copper windings, a laminated steel core, aluminum housing, precision gears, and high-quality excitation coils designed to provide strong torque and quick, smooth engine cranking. It is a practical replacement option when diagnosing a no-start condition, slow cranking, intermittent starter engagement, or a worn original starter motor.Fitment noteThis style of 17886N starter is commonly specified for manual-transmission Acura RSX Type-S applications using the 2.0L K-series engine. Compatible listings identify a clockwise-rotation, 9-tooth pinion design rated at 12V and 1.2kW. Verify transmission type, VIN, engine code, mounting points, electrical connections, and the original starter’s part number before ordering, since some RSX configurations may use a different unit.For best results, inspect the battery, terminals, ground cable, starter relay, and engine wiring before replacing the starter, as these components can cause similar starting symptoms.
I have a 2019 Honda Accord EX. This fit my car perfectly. These filters are so easy to replace & change yourself. I like that this comes with both in a single purchase. I've had these installed for awhile, and have taken my car on a couple road trips since and have had no issues. Filters fit & seal well and value appears to be good for the price. Overall, good product and it does the job.
Great shield
I have a 2019 eGolf and the shield fits my car perfect. The shield is made of a solid plastic and is tough. It is an exact fit to the shield placement. I removed the old shield and replaced it with the new shield. Everything underneath is covered and under the engine bay is protected. I live on a dirt road and the shield keeps rocks and debris from hitting my motor and other vital components. If you are looking for a solid replacement for your engine shield check this on out. It will protect your engine bay and it will last for a long while through normal use. Just buy it, you will be happy you did.
Only that’s where I purchased all my car parts
Great radiator, perfect match to factory and an easy job.
Perfect fit and went in without a snag! Exactly like the Toyota original. NO LEAKS, which is one reason I chose this one. I installed it myself using mostly a No. 10 socket, and I did the entire job for $75. The last time I paid a mechanic to replace a similar radiator it cost me $500.
This power steering rack and pinion looks excellent and ready for install. The rack and pinion comes with inner and outer tie rod ends already installed. I was surprised that it came with a pair of cotton work gloves with rubberized grips and an instructional booklet with pictures to help walk you through install.Overall a good aftermarket replacement and a good price.
My vehicle a 2001 Ford Ranger 4.0L 4x4. This rack did not have the mounting stud (13mm nut fits on that) to hold the plate that secures the high pressure line from the pump and the low pressure to the cooler. They did respond to me and I have replaced that with an M8 1.25 x 20mm flange bolt (their specs said M8x1.25x6g and that what I used they state fits that specification). The rack length was slightly shorter than the original but it was leaking so badly and oil covered perhaps I mismeasured. I did roll each tie rod on one less rotation than what I counted to take it off. So far all is working. I do warn this felt nearly impossible to get off and in and on again. Would not have been possible without a detailed video on YT by Lakes Automotive Diagnostics he worked on a 2007 Ranger. You have to know it is more difficult on your back with jack stands and the turn back after install very difficult even with video. Read the comments there for tips as well. This is a secondary vehicle, that it was jacked and took my time was not a big deal. It is a risk if you were to rely on getting all done over a weekend.
Great replacement
This front left CV axle was a straightforward replacement for my Infiniti. The fit was good, and the assembly felt solid and well made compared with the worn original. Installation went smoothly with the proper tools, and everything lined up as expected. After installation, the vehicle drove smoothly without the clicking and vibration I was experiencing from the old axle. Overall, a good replacement part that restored confidence in the front drivetrain.
Great price and great product. Why pay dealership prices and it fits perfectly. For a fraction of the cost. I have a 2022 Volkswagen Taos. Dealership quoted $80. Took me minutes to replace ! And I am not handy at all!
This front left CV axle was a straightforward replacement for my Infiniti. The fit was good, and the assembly felt solid and well made compared with the worn original. Installation went smoothly with the proper tools, and everything lined up as expected. After installation, the vehicle drove smoothly without the clicking and vibration I was experiencing from the old axle. Overall, a good replacement part that restored confidence in the front drivetrain.
The PHILTOP 17577N starter motor weighs in at a solid 15.8 pounds with a heavy cast metal housing that feels like it will last for years. The thick steel casing has a sturdy weight and the black painted finish looks tough enough to handle engine bay heat and road grime without peeling or rusting away.This thing puts out 3.6 kilowatts of power through its precision gears and high quality coils so it spins fast enough to get that big 7.3 liter engine turning over even when it is freezing outside in January. The tooth pinion has exactly twelve teeth just like the original Mitsubishi unit it replaces so everything lines up perfectly without any weird gaps or misalignment problems during installation. I did not have to bend any brackets or drill new holes either which made my life a lot easier since I am not some fancy mechanic with a full shop behind me.The starter motor runs quiet too unlike some of those cheap knockoffs that sound like a blender when you try to start your truck in the morning. I would say this is definitely worth every penny if you need a reliable replacement for your old worn out starter motor.Pros:Heavy duty construction with solid metal housingPerfect fitment for 1994 Ford F250 and F350 trucksQuiet operation without excessive noise or vibrationEasy bolt on installation with no extra parts neededCold weather performance is excellent even in deep freeze conditionsCons:Only available in one size option right now which limits compatibility options for other years of trucks
Great product
This power steering rack and pinion looks excellent and ready for install. The rack and pinion comes with inner and outer tie rod ends already installed. I was surprised that it came with a pair of cotton work gloves with rubberized grips and an instructional booklet with pictures to help walk you through install. Overall a good aftermarket replacement and a good price.
621–640 of 60,972 reviews