42025-04-20

You'll have to cut original studs for these to work. I also put loctite on the threads just to make sure they wouldnt back off.

42025-04-19

Worked well to widen the stance of my Kubota BX2380. Easy install. Make sure to add a corrosion protection product of some sort between dissimilar metals. Only issue I ran into was needing an incredibly thin walled deep socket to install. Standard didn’t work but after digging thru sockets found one that was super thin wall. Recommend buying a thin wall socket if ya don’t have one or you won’t get these tight. Be sure to tighten to manufacture torque specs.

42025-04-19

Simple install, sized accurately. Give a better stance without handling change. Value for cost.

42025-04-18

I was able to run Jeep Wrangler Rubicon hard rock wheels. I was a little apprehensive due to others stating spacers can lead to catastrophic failure. However I took care when installing and have had great luck with these spacers. After Approximately 3K miles and 2 wheeling trips to Southington Off-road I am happy with my results. The Only Downfall was in my application the rear axle's studs were too short. This is easily and inexpensively remedied by installing longer studs.

42025-04-18

Easy to install and had all the parts needed, nicely packaged, even gave a link on how to install

42025-04-18

Decent product, simple installation

42025-04-17

Saved me time and money. Used an old set of steel rims for my winter tires. They fit great and caused no rubbing issues. Stance on the car even looks good.

42025-04-15

Not the easiest to install, had to wrestle with it a bit, but it's working fine now.

42025-04-15

I was a bit nervous doing this myself, but the installation turned out to be pretty straightforward.

42025-04-15

Excellent