Good buy
Good fit
Read product reviews from across PHILTOP.
4.7/5
Based on 60,972 reviews
60,972 reviews
Good fit
Good fit
My OBD scanner was showing a misfire on cylinder 4 of my project Chevrolet Suburban. Since I was already going through the work of reaching that plug, I decided to replace the complete set of spark plugs along with all of the plug wires.These iridium plugs arrived pre-gapped, but I still checked every one before installation. All of them were spot-on for the specified iridium-plug gap for my application. That saved time and meant I did not have to risk damaging the fine iridium electrodes by trying to adjust them.The plugs fit correctly and installed without any product-related problems. Some of the cylinders on a Suburban are difficult to reach, especially number 6, but that is due to the engine design and not the plugs. After replacing the plugs and wires, the engine is running properly and the cylinder 4 misfire has not returned.Because I replaced both the plugs and wires at the same time, I cannot say with certainty which component caused the original misfire. What I can say is that these plugs arrived in good condition, were properly pre-gapped, fit as expected, and are working well.Based on the accurate gaps, correct fit, smooth operation, and successful repair, these appear to be a very good value replacement set.
I picked up this four-pack of ignition coils as replacements for my Nissan Rogue Sport, and the fit was just what I needed. The coils were packaged well and looked like they were made with decent attention to detail. Installation was straightforward and didn’t require any unusual tools beyond what I normally use for basic maintenance. After replacing the old coils, the engine ran smoothly and the roughness I had noticed was gone. Overall, it’s a convenient replacement set that saved me from having to buy the coils individually.
It working good on the vehicle
great set, flawless from what I can see. the more I cleaned the old ones, the quicker they fogged up, so replacing them was the best option
This splash shield has a clean, molded design with defined mounting points. I appreciate that the listing provides replacement part numbers, which helps when checking the correct application. An underbody panel is easy to overlook, but it serves a practical purpose. This is the kind of replacement worth considering when an existing shield is missing or damaged. A useful option for a matching Volkswagen application. Being able to compare the panel shape and part numbers is helpful when selecting the right replacement.
My OBD scanner was showing a misfire on cylinder 4 of my project Chevrolet Suburban. Since I was already going through the work of reaching that plug, I decided to replace the complete set of spark plugs along with all of the plug wires. These iridium plugs arrived pre-gapped, but I still checked every one before installation. All of them were spot-on for the specified iridium-plug gap for my application. That saved time and meant I did not have to risk damaging the fine iridium electrodes by trying to adjust them. The plugs fit correctly and installed without any product-related problems. Some of the cylinders on a Suburban are difficult to reach, especially number 6, but that is due to the engine design and not the plugs. After replacing the plugs and wires, the engine is running properly and the cylinder 4 misfire has not returned. Because I replaced both the plugs and wires at the same time, I cannot say with certainty which component caused the original misfire. What I can say is that these plugs arrived in good condition, were properly pre-gapped, fit as expected, and are working well. Based on the accurate gaps, correct fit, smooth operation, and successful repair, these appear to be a very good value replacement set.
great set, flawless from what I can see. the more I cleaned the old ones, the quicker they fogged up, so replacing them was the best option
Excellent product, fit perfectly
It working good on the vehicle
This product worked perfectly on my 2014 Subaru Outback drivers side window.
Replaced my leaking PS pump with PHILTOP one. So far so good. Installation wasn't too hard. Make sure you have a pulley puller (borrowed from O'Reillys) and for my particular car, the nylon O-ring for the pressure hose. The PHILTOP PS pump is working like it should and it's cost much less than OE pump.
Great fit and performance like oem. Had drove a lot of miles since and the caliper still looks shiny and no corrosion on it. I’d say its a great buy.
My factory lower splash shield was cracked, dragging, and missing several fastener tabs after years of road debris and oil changes. I picked this up to restore proper underbody airflow and keep road grime and salt off the oil pan and accessory belts.The molded plastic has good rigidity and thickness without being too brittle or flimsy. All the mounting holes and clip locations lined up properly with the factory subframe and bumper tabs, so I didn’t have to drill any custom holes or force zip-ties to get it into position.It tucked up nice and flat under the engine bay, restoring that clean OEM fit. Having the belly pan back on has also cut down on a bit of the highway wind noise from underneath the front end. Definitely a great, budget-friendly alternative to the overpriced dealer replacement.
I’m really happy with this catalytic converter. I bought it as a replacement for my Honda Civic, and so far it has been a great option for the price. The part arrived well packaged and protected, with no dents, scratches, or damage from shipping. Everything looked just like the pictures and the overall construction felt solid when I took it out of the box.I also really liked that it came with the necessary hardware and gasket, which made the installation much more convenient. The fit was good and it lined up properly with the existing exhaust connections. Installation was pretty straightforward for someone who is comfortable doing basic car repairs, although having the right tools definitely makes the job easier. Some of the old bolts can be difficult to remove depending on the condition of the original parts, so I would recommend having penetrating oil and the proper tools ready.Once installed, the Civic started up normally and the exhaust sounded good. I didn’t notice any unusual rattling or excessive noise coming from the new converter. It also gave me peace of mind knowing that I was replacing the old catalytic converter with a new one instead of trying to repair or clean the original.For the price, I think this is a very good value compared with paying a much higher price for a converter from a dealership. The quality seems good, the fitment was accurate for my vehicle, and having the installation hardware included was a nice bonus.Overall, I’m very satisfied with this purchase. It seems well made, arrived in good condition, installed properly, and works as expected. If you need a replacement catalytic converter for a compatible Honda Civic and want something reasonably priced without spending a fortune, I would definitely consider this one. So far, it has been a great replacement and I would purchase it again.
Works perfect on my 2004 chevy colorado
It’s working great so far!!!!!
I got this for my 97 Sierra 4x4 single cab, and had a mechanic friend install it and so far its working great. It came with grease already on the spring assy so thats one less thing to have to remember during installation. As the pictures show, it looks to be a nice, thick metal and the motor harness has a protective sleeve. It went in without issue and everything lined up and fit great so only time will tell just how durable it is and I have a good feeling about it, and for the current price I'd definitely buy it again, good buy.
Great fit and performance like oem. Had drove a lot of miles since and the caliper still looks shiny and no corrosion on it. I’d say its a great buy.
141–160 of 60,972 reviews